Height from Top of Brackets to Top of Receiver Tube on Curt Trailer Hitch 13086
what is the measurement from the TOP of the side brackets that fit to frame to the top of the 2inch reciever SQUARE the OD of welded area of the the square I have a custom bumper that is on the truck so I need to know the HEIGHT of the hitch...
Does Rampage Minivan Center Console Fit Specific Vehicles
Hi, Will the the RA39923 fit in a 1985 Toyota Hilux or 4Runner. The vehicle is a Toyota Dolphin Motorhome actually. If so will I need any pieces to attach it. | The Rampage Minivan Center Console # RA39923 is a universal application that measures...
Axle Information Needed To Find The Correct Brake Assembly For Your Axle/Trailer
Good Morning! I am trying to find good brakes for my tandam boat trailer the boat is about 4,000 lbs and would like brakes that work when in reverse what would you recommend? | When the brakes are engaged, the rotating assembly will stop or...
What are the Overall Dimensions of the Bestop TrailMax II # B3944015?
can i get dimensions of this seat? | I went ahead and got those dimensions for you from our warehouse. The Bestop TrailMax II Fold & Tumble - Vinyl Rear Bench # B3944015 measures 33-1/4" wide x 19" deep x 30-3/4" tall (with the headrests extended...
Does K-Source Replacement Side Mirror # KS70003T Come With Etrailer Printed on Glass
Hello, Could you please answer a couple follow-up questions: 1 Is the bold etrailer I see in the lower right-hand corner of the mirror there permanently, or can it be removed? 2 I would be installing—not replacing—this mirror my truck doesnt...
Wiring Harness for 1993 Toyota Pickup
I have part#43315 for tow wiring for my Toyota pickup 1993 you it fit my Toyota | The Hopkins 4-pole trailer wiring harness kit # HM43315 that you mentioned fits the 1993 Toyota pickup and also the following vehicles: 1989 - 1992 Toyota Pickup 1996...
Can Flex a Lite Fan FLX236 Install on Vehicle that Had Manual Fan
can this electric fan be hooked up a the 1989 pickup that does not have a electric fan already? | Yes you can install the Flex a Lite fan # FLX236 on a 1989 Toyota Pickup but you'll also need a wiring kit/thermostat part # FLX31149 and you'd...
What Is Needed To Flat Tow A 1987 Toyota Pickup
I have a 1987 Toyota pickup 2WD. and interested in the roadmaster tow bar for my truck so I can tow my truck behind my cabover camper. can I use a roadmaster tow bar for this truck and how hard would it be to install and which one do you recommend...
Does K-Source Mirror # KS70003T Fit 1987 Toyota Pickup
I would be installing this passenger-side mirror on my 1987 Toyota pickup for the first time the passenger door has never had one affixed to it. Am I correct that the mirror mounts onto the truck door secured by only the two small screws I see...
Recommended Steering Stabilizer for a 2016 Forest River Georgetown XL 378TS
I need a Steering Stabilizer For my motorhome Georgetown 378ts 2016 | I recommend the Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets # RM42RR for your 2016 Forest River Georgetown XL 378TS. This stabilizer uses a nitrogen-charged...
Trailer Wiring Harness for a 1994 Toyota Pickup
I have a 1994 toyota pickup base model. I also have a Tow REady Modulite protector 17499-204 which connects directly to the battery. Can I use this product with my Toyota pickup? | We have a harness that can work for your 1994 Toyota Pickup. First,...
Troubleshooting Tekonsha Voyager Brake Controller When Brakes are Always Engaged
Hooking up a voyager controller to 1942 Chevy ton truck 12 volt. My trailer brakes are on continuous. Also the light on controller is red all the time. Can you help me? | It sounds to me like you have the red wire coming from the Tekonsha Voyager,...
Recommended Wiring Harness For 1988 Toyota SR5 Pickup Truck
Interested in putting a 4 pole trailer wiring kit on my 1988 sr5 pickup. Saw a video on YouTube of part# 118379 being installed on a Tacoma and it said it was compatible on 86-95 pickups as well. Looked at your site and its telling me different....
Will the Westin Replacement Bumper # 61000-94400 fit 1985 Toyota Pickup Long Bed
What are the dimensions for this bumper? My existing step bumper is approximately 61inch long or wide, the 2 bracket supports are approximately 10-1/2inch in from each end, the 2 bracket supports are spaced approximately 40-3/4inch between,...
Bearing Buddy and Standard Grease Caps to Fit 1.98-Inch Hub Bore
Have a trailer... once i think it was a kawasaki jet ski trailer. My question is... it takes a 1.98 bearing protector but it needs about half an inch more space for the axle nut not to bottom out. The off the shelf regular ones that were on...
1994 Toyota Pickup Replacement Mirror From CIPAPassenger Side
truck came with no passenger mirror, need to install, product comes with hardware. | The CIPA Replacement Side Mirror - Manual - Black - Passenger Side # CM17094 for your 1994 Toyota Pickup does not come with hardware. It utilizes the existing...
Are Bumper Brackets Needed for Support when Installing the CURT Hitch #13086 on a 1986 Toyota Pickup
I would like to install this hitch on my 1986 Toyota pickup. The truck does not have a rear bumper or rear bumper brackets and I need to know if the hitch relies on the bumper brackets for support of any kind. I recently purchased and returned...
Troubleshooting Trailer Wiring that Doesnt Function After Install on 1987 Nissan Truck
I purchased a wiring kit for my 1987 Nissan pickup and removed the driver sidw rear tail light grounded white wire mounted the converter and pluged wires in ran green wire across to other side and pluged in I only have tail lights on trailer...
Trailer Wiring Harness for a 1996 Nissan Pickup Truck
I need one for a 1996 Nissan pickup. Will this one fit, or do you have one that will fit ? | Yes, we do have a T-connector style trailer wiring harness for the 1996 Nissan pickup. You will need to use # HM43505. I have included a link to the...
Is Optronics Sealed Streamline LED Trailer Tail Light Designed to be used with a 4-Wire System
is this light compatible with a 4 wire system? | The Optronics Streamline LED Trailer Light is designed to be used with a 3 wire system, not a 4 wire. It has 3 wire leads, one for ground, one for tail light and one for a combined brake/turn...
Curt Hitch that Fits 1992 Toyota Pickup Deluxe
Will this fit my Toyota deluxe 1992? | We have custom fit trailer hitches for your 1992 Toyota truck like the Curt Class III part # 13086 which will fit and work well, but the Curt # E-3S is a universal style hitch that doesn't have vehicle...
Using Spacers to Install CURT Trailer Hitch # E-3S on a Step Bumper
The ball sleeve that goes through the bumper protrudes below the step-bumper about 1/8 and interferes with full surface hitch to underside of bumper contact. Is this a problem? | The CURT Step Bumper Trailer Hitch, # E-3S, comes with some square...
Trailer Brake Lights/Turn Signals Do Not Work After Installing Wiring Harness on 1984 Toyota Pickup
I have a 1984 toyota pickup. I bought a four way trailer plug. It has 2 turn wires a brake light wire, running light wire, and a ground to attach to my truck that goes to a box then to a four way plug. I have plug tester to plug into my truck...
Recommended Roof Rack For 1996 Mitsubishi Delica L300 High Roof Van
Hi - I am wondering if I should buy the 8-3/10inch gutter mounts or the 11inch gutter mounts to fit on the high top 1996 Mitsubishi Delica L300 Active World. I can not verify size with the vehicle match feature of your site. Thanks | I checked...
Filter Your Search
Contact and Help