What Color Is On the Underside of the Solera Sand Fade Replacement Awning Fabric
We are considering the purchase of the Solera Fade replacement awning. Is the underside all white. We have a 2010 Keystone Montana Hickory model. Thank you. | The underside of the Solera Sand Fade Replacement Awning Fabrics like the one...
Replacement Landing Gear For 2011 Keystone Montana
I own a 2011 Keystone Montana 290RL T11. What would be the correct landing gear for this model? | The Keystone Montana is unique in that it has its own set of landing gear legs with three weld stops (tabs) instead of two, and the only option...
How To Determine Correct Electric Stabilizer Motor for Keystone Montana
The rear stabilizer quit working. I have voltage at the motor when the switch is activated for the stabilizers. Is the LC138445 motor the correct one for my fifth wheel 2011 keystone 3150RL. There arent any markings on the motor to identify...
Best Way to Lift 2011 Keystone Montana 3100RL
Hello, I have a 2011 Keystone Montana 3100rl. I have a steep driveway and need some extra clearance in the back. What suspension lift kits do you have that would work? Thanks | The best option to lift your 2011 Keystone Montana 3100RL is...
Mounting Hardware For MORryde Equalizer MR27ZR
The old equalizer looks nothing like this. The hanger is 5 inch wide. I like the Morryde CRE2-35 but cant find the mounting hardware to see if spacers are added since the hanger is 5 inch and the CRE2-35 is a few inches narrower. | The mounting...
Replacement Follow Leg for 2010 Keysonte Montana Hickory With Venture Landing Gear
I am looking for a replacement part for a VMC900L-380734 lagging landing gear. Venture model no. 1A065019-02-02. For a 2010 keystone montana. | Lippert was unable to identify exactly what you have based on part numbers, but I can still help...
Availability Of Foot Pad/Boot For The MORryde StepAbove RV Steps
RE: The MORryde StepAbove Strut Assist Fold-Down 4-Step Does MORryde make a rubber cap/boot that fits on the bottom of the feet of the steps? Kind of like the Jake Pads for the camper feet that would just snap on permanently. | Hello Janet....
Will The Motor On My Auto Open Vent Wear Out When The Lid Hits The Vent Cover And Runs A Few Seconds
What is the difference between the Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Cover # FVU1500WH White, the cover I have is U1500WH. I don’t believe there is the “FU” at the beginning of the model number. My nephew tried the cover on...
Replacement Bearings, Races, and Seals for a Dexter Number 297697 7K Axle
I need to replace the wheel bearings and would be interested in a complete assembly, two axles with number 297697 or 1173041-4. What set would match with this axle number? | The part number 297697 is for a Dexter 7K axle. There is a full bearing...
Troubleshooting Linc Analog Remote Not Pairing To Receiver and All Lights Flashing On Remote
When I power up my remote, all the lights are flashing or cycling. I press and hold my momentary button on the receiver, then I press and hold the light button on the remote but nothing happens. Is it normal for the lights to be cycling like...
Recommended Replacement Leveling Jack For a 2010 Keystone Montana With M-9000-PK Motor
I am looking for a leveling jack for a 2010 Keystone Montana I have the part no. to the motor but I only need the jack part no motor Part No.M-9000-PK If you need more information I can get what you need. Thank you! | The correct replacement...
Could Replacement New-Style Linc Analog Remote # LC292614 Work on 2011 Keystone Montana
Will this replace the old remote on a 2011 Keystone Montana? | If your current remote looks like the Replacement New-Style Linc Analog Remote # LC292614 then yes this would be the correct replacement for it. If it doesn't we do not have a solution....
Replacement Motor for Fan-Tastic Roof Vent
Fan-Tastic fan. Fan stopped turning, went on roof and cleaned push switch, even though it looked fine. Motor seems very warm while I was up cleaning the switch. Could it be I need a new motor? Replacement Fan Motor Assembly Kit for Fan-Tastic...
Replacement Gearbox for Venture Landing Gear on 2010 Keystone Montana Hickory
If I have a Venture 5th wheel RV Landing Gear mounted outside the frame with 291/2 inch legs what 3 to 1 gear box do I need??? | The Replacement Gearbox for Venture Aluminum Electric 5th Wheel RV Landing Gear Assemblies # LC276602 is the correct...
Recommended Water Heater for a 2011 Keystone Montana Hickory 5th Wheel
Replacement gas/electric water heater for 2011 keystone Montana hickory 3750fl | For your 2011 Keystone Montana HIckory I recommend checking out the Furrion RV Tankless Water Heater # FR98SR. This is a tankless water heater that will provide...
Recommended Preload for SumoSprings TSS-107-40 Trailer Helper Springs
Hello, I have a 2011 Montana3665RE fifth wheel 38. I ordered the TSS-107-40 last summer to install. I started the install this weekend and realized that the distance from the frame to the spring bracket is 4. This would preload the sumo, is...
Will SolidStep Manual Fold-Down Steps Fit a 2010 Montana
will these steps fit a 2010 Montana? There is a well step inside the door! | We haven't fit the SolidStep Manual Fold-Down Steps, # LC791573 specifically to a 2010 Montana. However, if you let me know the dimensions of the well step, how wide...
Landing Gear Motor Replacement for 065-041012-01 with 7140 RPM
will all name brand of landing gear motor fit I have a !-065-041012-01 with 7140 RPM | Based on the info you found on the landing gear motor you have the correct replacement landing gear motor would be the # LC141893. Your design is very common...
Higher Capacity Trailer Hitch Recommendation for 2013 Keystone Montana Hickory 3100RL
What receiver hitch with a 500# TW is recommended for a 2013 Keystone Montana Hickory 3100RL? | For your 2013 Keystone Montana Hickory 3100RL the best option for a hitch that has a 500 lb tongue weight capacity is the Curt Multi Fit Hitch part...
Landing Gear Kit For A 2010 Keystone Montana Hickory
What kit do I need, also what is the difference between the lead leg and the fallow leg. | When it comes to adding a landing gear set to your 2010 Keystone Montana Hickory The Landing Gear Set w/ Handle # RVLG-8HDL will work for you. The landing...
Cushioned Pin Box for either Lippert 1716 or 1116 Pin Box
Hello, I’m trying to find out what flex air pinbox I need. From looking on line I have the 1716-1116 pinbox mount. It has 3 rows with 3 mounting holes? I have also seen where they say most of the flex air pinboxes can be retrofitted to work...
Troubleshooting a Furrion Tankless Water That Has Low Pressure At The Shower Head
Ive replaced my shower faucet twice as well as the wand. Last year I installed your Furion on-demand water heater. I get good hot water to the kitchen and bathroom sink but not to the shower the pressure just isnt very good, unlike the bathroom...
Brake Line Size for HydraStar Disc Brake Kit w/ Actuator for Tandem Axle Trailers
What size are the hyd. Lines 3/16” or 1/4” I will be cutting off excess and reflating them | The brake line that comes with the HydraStar Disc Brake Kit w/ Actuator for Tandem Axle Trailers - 13" Rotor - 8 on 6-1/2 - 7K # HSE7K-T1SO is a 3/16"...
Recommended Replacement For A Lippert Stabilizer Jack # 113407
direct replacement for light stabilizer jacks LCI model # 113407 | The direct replacement for your Lippert Stabilizer Jack 113407 is the Lippert High-Speed Power Stabilizer Jack # LC369774. |
Filter Your Search
Contact and Help