!Monaco  x   >   TeraPump  x   >   Ark  x   >  

WHAT ARE MOUNTING BRACKET DIMENSIONS FOR AR94FR. | The weld-on mounting bracket for the ARK # AR94FR Drop Down Corner RV Stabilizer Jacks measures 4-5/8 x 2-7/8 inches. The bracket has holes for the hardware that attaches the jack to the brackets....

I have this Jack on my trailer right now and it’s a BEAR to move. The wheel doesn’t pivot well even on concrete and it makes it nearly impossible to move the boat by myself. Is there a Jack that’s a bolt thru like this, but with a bigger or...

Greetings. What is the roller height? looking for roller hight in the 24inch range Cant find it in your description. Thanks | The Ark Ezi-Guides Self-Aligning Boat Trailer Loading System # AR74FR has an overall length of 15" with both rollers...

The stabilizing jacks have rusted out in my Airstream 2003 22 foot trailer. The Airstream Part Number is 400914-03, but the jacks are on back order. Can I substitute the Ark Camper Jacks - ARK94FR instead? Thanks | The ARK # ARK94FR stabilizer...

Hello I damaged one of my scissor jacks on my RV and I am looking at replacing them with better sturdier jacks. Would these jacks be suitable for a 2021 Rockwood Roo 21SSl as far as weight and stability support? | The Ark Drop Down Corner RV...

Can I use Anderson mC4 r to connect a few panels to this battery bank? | Solar panels can absolutely be added to the ArkPak 730 Portable Power Station # AP730US to provide a charge for the battery. When doing this though the wire leads from...

I have 4pt leveling system. Can I install these in the middle of my 5th wheel to add extra stability or are they only designed for rear? | Yes, it's perfectly fine to mount the Ark Drop Down Corner RV Stabilizer Jacks - 30" Long Corner Steadies...

I have 2023 Coachmen northern spirit 2145rbx. Can I bolt these Jacks on, or do they need to be welded? | The 30" Ark Drop Down Corner RV Stabilizer Jacks # ARK94FR have a weld on design. This is the only way to install the jacks with the included...

Looking at one of the ARK jacks for our 2021 Escapod Topo1 Off-road trailer ~2500 pounds loaded, so tongue weight around 250-300# most days. We have a short tongue on the trailer and limited distance from the installation to a tongue box. ...

Can you recommend a bolt-on trailer jack that will bolt to an 8 high trailer beam? I can find jacks for 5 and 6 inch beams but not 8 inch. The distance from the bottom of the trailer frame to the ground is 15 inches. Thank you. | Typically...

Would there be any negative impact using this articulating hitch with a WDH like the Eazi-Lift TR3? Wondering about the ability to use a WDH for long road trips and then be able to pull the WDH off and a standard ball hitch on the vehicle...

Hello - I have a trailer with a tongue that is 3 inches wide and 2 inches vertical. I am looking for a tongue jack with a wheel that will bolt on to this tongue. I wanted to ask if you could recommend a product. Thank you. | We've got a couple...

Hello, I need a replacement stabilizer jack for the front right of my 2022 Forest River No Boundaries 19.3 travel trailer. The part number is PJ-01. I tried searching your website but could not locate that part. Would someone from your team...

How much does the Ark Trailer Jack - ARK54FR weigh compared to the single-wheel ORJW1SU? | Because they're meant for off-road use and abuse, ARK trailer jacks are built to last. They are very heavy which makes them able to withstand a tough...

Hi, I have a lighting hybrid enclosed snowmobile trailer. My tongue jack with caster rolls very hard its hard to turn and maneuver around my garage. Any suggestions for an upgrade? Thank You, Tom | I've had the same issue before and converting...

Whats the total length when the ark down corner rv stabilizer is fully extended | The fully extended height of the Ark Drop Down Corner RV Stabilizer Jacks # AR34FR is 24". The fully retracted height is 16". |

Hi, will you get me the over-all length specs for ark94fr and ark34fr? I need fully extended and fully collapsed. Thanks | I contacted the manufacturer about the lengths for these stabilizer jacks and have included the information they were...

I have a spartan boat trailer SB140. I need all the hardware for this trailer rollers, brackets and winch tower and winch. Im just using it for a 14 ft fishing boat so doesnt have to be fancy. Can you help with this. Thanks | Yes, I can help...

I am looking for a removable trailer jack similar to the ARK 750 but less expensive, must be removable. Any suggestions and appreciate Thanks Jerry | The only solution we offer for a removable trailer jack is the ARK part # ARK57FR that...

If I park my trailer at an asphault campground on a slight slope, is there a brake or some way to keep the trailer from rolling away? Right now I have a steel base plate so I dont need to worry about it, but I want to upgrade to a wheel on...

When the trailer is attached to the vehicle, there doesn't seem to have a way to securely lock the Part Number AR44FR to the vehicle? Its seems like anyone could unhitch the trailer from the vehicle? Is there anyway to prevent this from happening? Thanks...

How high can diesel be pumped with the inlet in a 5 gallon can on the ground? | The TeraPump Fuel Transfer Pump for Gas Cans # TE98VR is battery powered and has a 10' long hose, so theoretically it can pump diesel up to 10' up and has a flow...

I have a 1200 lb or so probably 1600 loaded tear so has just 120-160lb tongue weight. Is this weight reference on this or other tongue jacks referring to tongue weight or trailer weight? | When a weight is listed for a trailer jack like the...

Hi. I would like to install side galvanized guides on my boat trailer. My boat is 26 and some 9 lbs. So, any guide needs to be heavy duty. All the guide products I see on your website are not heavy duty enough. Can you help with this...