SuperCoils Recommendation for a 2012 Ford F-550
Could you please tell me if you have the 7,700lb springs available for the 2012 F550 superduty? How much additional lift will it provide over the stock 7,000lb springs? | I spoke with my contact at Super Springs and she confirmed that the SuperCoils...
Trailer Brakes Work with Manual Override But Not Brake Pedal on 2008 Ford F-550 Super Duty
I have a 2008 ford 550 super duty truck I have no power to my trailer brakes when I press the brake peddle but I have power when I use the controller manually can you help me | When a brake controller works with the manual override but not...
Brake Controller Install Port on 2003 Windsport 35D F53 Chassis
Do you know the location of the brake controller wiring under the dash and which adapter, the 3035 or the 3034 is required for the 2003 Windsport. | Since your motor home is on the Ford F-53 chassis then you are in luck because there is a harness...
Recommended Solution for Adding Gooseneck Hitch to 2001 Ford F-550 Cab and Chassis
Hey, can you direct me to the best, highest rated, gooseneck and 5th wheel combo that I can install in my 2001 f550 cab and chassis truck. The truck has a 8 4 fontaine fiberglass bed on it. Also any information you may have to help install it....
Is Converter Needed to Go From 7-Way Round to 7-Way Flat
I PURCHASED HM47425 BUT IT WILL NOT WORK WITHOUT A COVERTER IS THAT CORRECT ? TOWING A P.U BEHIND A LARGE TRUCK W/7 PIN ROUIND | Yeah it's not going to convert the separate trailer wiring circuits without some type of converter. If by chance...
Window Cover Recommendation for Class C Motorhome Built on F-550
I have a class C RV on a F550. Which cover would you recommend. | The best option for a Class C motorhome windsheild cover is going to be the Adco Deluxe Cover part # 290-2507 which is designed for Class C motorhomes just like yours. I attached...
Brake Controller Installation Harness Recommendation for a 2014 Ford F-53 Motorhome
I can not find the part number for the wire harness to fit my 2014 f53 ford chassie for the Hopkins Trailer Brake Controller | According to the Q-206 document that was released by Ford the correct brake controller harness needed for a 2013...
Prodigy P3 Brake Controller Installation in a Ford-Based Motorhome
Exactly what I have, 2010 Georgetown on F550 motor home stripped chassis DRW 208 wheelbase F53 cant find the 14 PIN gray connector anywhere, this has a Toyota dash panel, have the instrument panel loosened to look behind ans well as the radioheater...
Is Adapter Needed for 2006 Ford F-550 Factory Brake Controller and Carlisle Actuator HBA-16
Hi, I have a 2006 F-550 ford and pulling a 2012 Mobile Suite fifth wheel that has electric over hydraulic disk brakes. The trailer has a hydraulick brake actuator HBA-16, serial #517996. Do I or should I have an HBA-CAM installed. Laetly I have...
Gooseneck Hitch Recommendation For 2002 Ford F-550 Super Duty Without a Bed
i have a f 550 2002 super duty with no bed and i haul up to 21500 in cargo with a trailer weight of 7500. i had the neck snap on the goose a couple weeks back.Want to up grade hitch to handle loads and same with my neck on my goose. what products...
Brake Controller Installation on 2006 Fleetwood Terra 32S Motorhome
I have a 2006 Fleetwood Terra 32S class A Motor home. I am looking at pulling a trailer with dual electric brakes. There is a 7 pin connector on my motorhome... Do I need to add an electric brake controller or is one factory installed? If...
Gooseneck Hitch Recommendation for a 2004 Ford F-550
I have an 2004 Ford F550 super Duty. Will this gooseneck hitch work for me? BWGNRK1111 | I have a solution for you, but the B and W part # BWGNRK1111 would not fit the F-550. After speaking to my contact at Curt, I have found the Curt Gooseneck...
Factory Brake Controller on 2008 Ford F-550 Does Not Show Power with Brake Pedal Pressed
2008 F550 with new factory controller. Using test light I get signal when manually activating controller, but nothing when applying brake pedal. | On a lot of proportional brake controllers you will only get power on that output wire when applying...
Filter Your Search
Contact and Help