Fittings for Installing Transmission Cooler on 1996 Chevrolet Silverado
What the right part for a 96 chevy silverado 1500 4.3 engine | The Delrale # D13018 Adapter Fittings for GM, are the correct fittings for installing a secondary transmission cooler on your 1996 Chevrolet Silverado. |
Is the Thermostat for the Advent # ADV94FR Air Conditioner Wireless?
Could you please tell me if the thermostat included with the Advent air conditioning unit ADV94FR is wireless? If not, what kind of cable does it use? What length of cable is included? Does the t-stat require its own 12v source? Thanks! | Thanks...
Suspension Enhancement Recommendation for 1993 GMC K1500 with Camper in Bed
I have 1993 gmc sierra k1500 I have a camper on it and it dragging on the rear what kind of helper springs should I get, over or under springs | The Timbren suspension kit part # TGMRCK25 is your best option for suspension enhancement for your...
Is Purple Wire on ETBC7 Wiring Kit for Reverse Lights on a 1988 Chevy Silverado K2500
First of all great video. Few questions. 1. What is the purple wire for? I assume for reverse lights 2. Once I have this completed I am wanting to add a 7 blade to the bed of my truck is there a kit for that or is there another option for it?...
Rear Suspension Enhancement Recommendation For 1996 GMC K2500 With Truck Camper
I have a 1996 gmc 2500 4x4 extended cab with a heavy 10’ overhead camper these helpers would have to be down tight under pressure all the time Pressure. Will They lift the back of truck up apx 1 1/2” to 2”. Also will i louse travel making...
Using Front Mount Hitch On 1995 Ford Camper Van For Platform Bike Carrier
hello, I have a very unque question, I have a 95 ford class b camper van that we pull a small trailer with, I also have a hitch installed on the front of my van for putting boat trailers in and out of the water and parking our small utility...
4 Inch Wide 24 Inch Long Nerf Bar Step Pads
i am looking for replacement step pads for a set of Bully nerf bars they are about 24inches long and 4 inches wide | These Replacement Step Pads are for Westin Nerf Bars # 21-0001 but are 4 inches wide and 2 inches long. They have tabs on the...
Dexter Self-Adjusting Brakes 23-468-469 Seem Weak
I recently purchased the Dexter Nev-R-Adjust Electric Trailer Brake Kit - 10inch - Left and Right Hand Assemblies - 3.5K, Item # 23-468-469 and Trailer Hub and Drum Assembly - 3,500-lb Axles - 10inch Diameter - 5 on 5 - Pre-Greased, item #AKHD-550-35-K...
Correct Trailer Hitch for a 1972 Chevy C10/K10 Stepside
72 chev stepside 1/2 short bed | Are you asking if the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75034 will fit your 1972 Chevy C10/K10 Stepside? If so then yes, this trailer hitch is a confirmed fit according to Draw-Tite. I checked...
Availability of Tailgate Mat for 1988 GMC Pickup to Match DeeZee Bed Mat
Just received the bed mat for my truck as a gift. Looks great. Can I get the tailgate mat to match DeeZee Heavyweight bed mat? | DeeZee does indeed offer a Universal Truck Tailgate Mat, part # DZ86700. According to DeeZee, the mat is indeed...
Does Curt Hitch # 13028 Fit 1966 Chevy C10 with Step Bumper
will this fit a 66 c10 pickup with step bumper? | I attached a picture (not a great one) that shows the Curt hitch # 13028 installed on a 1966 Chevy truck with a step bumper just like what you have so it would fit and work well. |
Rails for Mounting Reese 14K Hitch to 1997 GMC 2500
I bought a older small 5th wheel camper, i got the hitch with it, the hitch is a Reese 14 K clasic Hitch, however I do not have moiunting rails. Are the rails still availiable, or will the rails on the 16k fit, i am putting it on a GMC 97 2500...
How to Locate the Brake Switch Wire on a 1997 Chevrolet C/K Pickup
1997 chevy 3500CK truck, installing a brake controller. I have all the other wiring connected, but im having a hard time locating the brake wire so I can connect it to the controller. any info would be helpful. | To find the cold side of the...
Wiring Harnesses Needed to Install a Brake Controller on a 1995 GMC C3500
Does my 1995 GMC C3500 have any factory wiring in place to connect this P3 unit to? Do I have to splice it in place? Any suggestions as to what all I need? Thanks in advance. | Chances are the 1995 GMC C3500 did not come with a factory tow...
Hitch that Fits 1988 Chevrolet C3500 Crew Cab
This vehicle is at a model year change and having a hard time finding a fitment guide that lists my vehicle 1/2 and 3/4 tons in 1988 and 1 tons in 1989. So, I think a C3500 is the same frame as a R30, I am trying to determine the distance between...
Heavy Duty Trailer Hitch Fit for 1989 Chevy K1500 Pickup
I bought a Curt 15511 last year and could not get it to mount on my 1989 Chevy k1500 short and narrow bed 4wd stepside pickup. Id like advice on the correct direct fit bolt-on HD hitch for my truck. Also ... it would be VERY helpful if somewhere...
Aries Grille Guard For 1992 Chevrolet C/K Series Pickup Truck
I am in need of a brush guard brackets not sure the brand of brush guard | I am unable to provide the correct kit for you due to the fact that the mounting hardware is specific to the vehicle and the brush guard itself and we do not have that...
Does SuperSprings Custom Suspension Stabilizer Kit SSA9MTKT Require Separate Mounting Kit
On a 1994 K 1500 4x4 Z71 do you need to buy the mounting kit for the Super spring overload leaf? | The Super Springs Custom Suspension Stabilizer and Sway-Control Kit # SSA9MTKT is a confirmed fit for your 1994 GMC C/K Series 4X4 Z71 Pickup....
Can Detail K2 Rampage II Elite Snowplow Be Used with a Lifted 1978 Chevy Cheyenne
1978 Chevy Cheyenne with a 6 inch lift kit and 35 inch tires. would this mount allow the blade to be lowered enough to work properly? | The Detail K2 Rampage II Elite Snowplow # K2RAMP8219ELT will work with your lifted 1978 Chevy Cheyenne as...
Recommended Trailer Hitch for 1997 Chevy C3500 with Service Body
Needing to know what hitch I can install on a 1997 C3500 Chevrolet truck with a Knapheide utility body. I have not measured yet, but guessing I need a hitch for a 10 inch bumper? Thanks, | I do have some great trailer hitch options for a...
Will Curt Class IV Receiver C14081 Fit a 1997 Chevy Pick Up
1997 Chev pickup, extended cab, step bumper, factory tire mount under box. | As long as your 1997 Chevy pick up is equipped with the factory step bumper, the Curt Class IV Receiver, part # C14081 will indeed fit. We also offer some other items...
5th Wheel Trailer Hitch Custom Install Kit for 1993 Chevy K3500 Without Drilling
Will this kit work on a 1993 Chevrolet K3500 with 6.5 turbo diesel? No drilling on the frame? | The # HT31412 Husky bracket kit fits specific Ford Super Duty trucks from 2005 to 2010 but not your 1993 Chevy K3500. The Husky kit for your truck...
Best Weight Distribution System For a 2019 Jayco Jay Flight 26BH
We want to tow 2019 Jayco 26foot 26BH model trailer and need a system to tow it without swaying. What do you recommend? 1987 Chev 3/4 ton 4X4 truck and 2018 Dodge 1500 Bighorn with 64 bed | In order to tow your 2019 Jayco Jay Flight 26BH, I...
Trailer Hitch Recommendation for 1985 Chevy Van with 34 inch Frame
I need a hitch that will fit 34 in outside to outside 1985 v 30 Chevy step van | Since your van frame is 34 inches outside to outside that means your van was built on a truck "cab and chassis" frame so you need a hitch like the Curt part #...
Filter Your Search
Contact and Help