Does Curt Hitch # 13028 Fit 1966 Chevy C10 with Step Bumper
will this fit a 66 c10 pickup with step bumper? | I attached a picture (not a great one) that shows the Curt hitch # 13028 installed on a 1966 Chevy truck with a step bumper just like what you have so it would fit and work well. |
Hitch that Fits 1977 Ford F-250 with Narrower Frame
Ive got a 1977 Ford F-250 4x4 and my frame is narrow, I do not want to drill any holes as well | Sounds like you have a cab and chassis model Ford F-250 which has frame dimensions of 34 inches measured from outside to outside which we have hitches...
Dimensions of the Draw-Tite Front Hitch 65048 for a Jeep CJ-5
Im trying to figure out if I can make this part work for a 1977 CJ5. It has the original bumper. If I have to drill holes through and put longer bolts in that would not be a big deal. I am looking for the length dimensions if possible as I have...
Which Trailer Hitch Fits 1977 Ford F-250 with 34 inch Wide Trailer Frame
I have a 1977 f250 pickup that measures 34” outside to outside of frame rails. Just want to make sure that the BW class v hitch will fit. Thank you. | Based on the frame dimensions you listed for your 1977 Ford F-250 you actually have a cab...
What Trailer Hitch Will Fit My 1977 Chevrolet Pickup
Hello there, I was planning on buying a used trailer hitch off a 1985 Suburban, do you think that will fit my 1977 Chevy pick up heavy half?? Thanks | We do have a trailer hitch that will work with your 1977 Chevrolet Pickup although I doubt...
Installation of the Draw-Tite Hitch 75129 On a 1977 Chevy Blazer
Looking for a installation video for 74 Chevy blazer or pictures of where hard ware goes and how the hitch looks set up. It’s 4x4 and still has the the skid plate around gas tank. | The Draw-Tite Max-Frame Trailer Hitch Receiver part # 75129...
Trailer Hitch for 1977 Chevy K10 1500
1977 chevy k10 1500 shortbed I need a hitch for a shortbed | The most popular hitch we offer that fits your 1977 Chevy K10 1500 is the Curt Class III hitch part # 13028 which has great towing capacities and installs very easily. |
Hitch That Fits 1977 Chevy C/K Silverado with 35 inch Frame
I have a 1977 chevrolet silverado 1/2 ton heavy duty pickup I bought new. I have read where this fits frames 34inch wide, outside to outside. I measured and got 35inch outside to outside. This may not be exact but it is close. Will this trailer...
Trailer Roof Vent with 12 Volt Fan for a 1977 Chevy G-20 Van
Can the above vent-line assembly be fitted with an aftermarket 3 speed fan intake / exhaust as well or do you carry a product to do this with, I like to use my 1977 G -20 Chevy van for my outdoor leisure and need to keep it some what cooler...
Replacement Seals for 1-1/2 Inch Valterra Bladex Waste Valve
Which seals fit Valterra 1 1/2 Bladex T1001VPM Valve. Also which seal fits Bristol V1 3inch Valve 112895 may be part # | The Valterra Bladex Waste Valve Body for RV Gray Water Tank - Aluminum Handle - 1-1/2" Diameter # T1001VPM uses replacement...
Will Curt Trailer Hitch Receiver for 1977 Ford F-250 Work with 38 Gallon Tank
Will this fit my 77 Ford F250 2wd, 37inch frame with the replacement 38 gal gas tank? Although it looks like there would be plenty of room based on your customer pics for a 77 F150, the replacement of the original 19 gal tank required the...
Availability of a Pintle Hook Mounting Plate Rated for 10,000 Pounds
If the hitch is mounted closer to the shaft does the wieght rating increase? If this part is mounted in the 5 row hole position would it handle 10,000 lbs instead of 8,000? | The capacity of the Pintle Hook Mount, # 63058, is 8,000 pounds maximum...
Replacement Cover For Extang BlackMax Tonneau Cover on 1977 Ford F-100 With 8 Foot Long Bed
Do you have a replacement snap cover/ tarp for my 1977 Ford F-150? It has the Black Max soft snap 8 ft. Cover on it. Please help. Thank you.. | We do have a replacement cover/tarp for the Extang BlackMax tonneau cover that fits your 1977 Ford...
Does The Fastway WD System # EQ91-00-6100 Use Grip Tape Between The Bars And Brackets?
I have the e2 round bar 8000lb. Its 3 years old and the friction tape on what ever it is is completely gone off the bars and brackets from my last camping trip. Do you offer replacement grip or what can I use to replace it? | The Fastway e2...
How To Convert Vacuum Over Hydraulic Trailer Brakes to Electric Over Hydraulic Trailer Brakes
Hello there. I am currently running a vacuum over hydraulic brake setup on a 1977 F350 and gooseneck. I have just updated to a 2015 Dual Cab Iveco Daily which has an electric brake system already installed by the previous owner. On the gooseneck/...
Westin Fey Diamond Step Rear Bumper For a 1977 Chevrolet C/K Fleetside Pickup
I would like to buy a Diamond Step bumper for a 77-Chev Fleetside Pickup that measures 74in long and 7 or 7 1/4 in high. The one I found when entering my info shows a 64-in wide bumper. 71000 Do you sell one that will fit that is 74 inch...
Finding Someone to Install Trailer Hitch
Where can I find someone to install one of your trailer hitches in the Boone, NC - West Jefferson, NC area? j | Typically the best way to find someone to install one of our hitches like the Draw Tite part # 40050 is to find a local...
Fit & Compatibility of Bestop Low Back Bucket Seat B3942937 on 1977 Jeep CJ-7
On a Jeep low back bucket what is the measurement on the hole spacing for mounting to a frame on the bottom of the seat. width and length. Also do they come in grey if so what material? | On a 1977 Jeep CJ-7 that has the original seat riser...
Installing the Curt Gooseneck Flat Plate on a 1977 GMC K25 Truck with a Flat Bed
How much does the ball stick up above the plate. I know I will need to cut hole in the flat bed for this just need to know how much ball sticks up above plate ‘ thank you’’ | The top of the ball sticks up 4 5/8" from the plate it is mounted...
Loud Racing Muffler Recommendation for a 1977 Chevrolet Corvette
Hi, What is the loudest racing mufflers that I can install in my 1977 Corvette? Thanks | The straight-through style mufflers like the MagnaFlow Stainless Steel, Straight-Through Universal Muffler - Race Series, # MF14161, that you referenced...
Towing Package and B&W Class V Trailer Hitch Fit for a 1977 Ford F-350
Hello. I was wondering if the BWHDRH25198 will install on a 1977 F350. Thank you. | Yes, the B&W Class V Trailer Hitch, # BWHDRH25198, will install on a 1977 Ford F-350, but it was designed for models with a 10 inch deep drop step bumper. The...
5th Wheel Hitch Recommendation for a 1977 Chevrolet C/K Series Stepside Pickup with 6 Foot Bed
Is there a hitch that will work on a 1977 chevy stepside, and if so what is the model and where can I get one? | It is not recommended to install a 5th wheel hitch in a 1977 Chevrolet stepside C/K Series pickup with a 6 foot bed, because the...
The Frame Of My 1977 Ford Van Has Rivets On The Frame. Will The Curt # 14053 Still Fit?
Thanks for the details of your hitch #14053. Please note the notches on both of the hitch laterals. The rear frame of my 1977 Ford Chateau has a cross member at this approximate distance. The cross member is attached to the frame rails by half...
Trailer Hitch for a 1977 Jeep Gladiator J10 Pickup Truck
I have a 1977 Jeep J10 with a 119inch WB that I need a trailer hitch mounted. It has the stock bumper installed which accommodates a ball. Can you recommend a universal hitch? | Since there are no custom fit trailer hitches for your 1977 Jeep...
Filter Your Search
Contact and Help