!Designer Camper  x   >   !Transit T250  x   >   GCH Automotive  x   >  

This works well, but the video quality for the original backup camera is terrible now. Any suggestions on how to fix? | I reached out to GCH and they said that the only thing that would cause this is a pinched wire during the installation....

have a 2011 f250 superduty with factory tailgate camera with the display screen in rear view mirror No in dash display screen will this still work? Are the wire connections the same in this truck I dont know where to look for them in dash? |...

2017 Ford F250 Super Duty Looking for a bluetooth capable RV backup camera that will work with my existing Samsung bluetooth capable or Microsofy Surface tablets. Camera will be used for two setups: used for rear facing bed view lookinch when...

The information on your site says it only works when the truck is in reverse. Can you make it work while driving to see traffic behind you when no RV is attached? | The Custom Third Brake Light Camera System - Night Vision - 7" Screen # 3460004...

I see the advertisement picture showing an F250 with a horse trailer but it doesnt confirm that it fits that model when i enter it. Can someone confirm whether this fits? if not, can you recommend one that does? | The Custom Third Brake Light...

So I have a 2008 F350 dually and need a camera for my goosneck. But I have an aftermarket radio. It s the Kenwood DMX7706S. It has 2 camera inputs. I was wondering if this would hook up to the aftermarket radio. Or do I need part number...

I am looking at a back up camera for my 2016 GMC 2500. The one I like is part 3460010. Does this kit include the switch to change from my factory camera to the new bed camera? I was a little confuse if this was the case. Also when measuring...

I have a 2020 F2 50 lariat will this be a plug and play so I can use it on my monitor and not have to add an additional screen or switch it’ll pop up on my sink just like my tailgate camera? | If your vehicle has an aftermarket monitor, or if...

can the or switch be wired into one of the upfitter AUX switches? | Yes, you can install the Custom Third Brake Light Camera for 8" Factory Monitor # 3460006 on your 2016 Ford F-350 using one of the upfitter switches instead of the red toggle...

Hello, Im looking for a 5th wheel tailgate for my 2019 Ford F350 that has a mount to hold the factory backup camera. I see that you have a possible v-gate available but I dont see any information about a backup camera mount. Please advise if...

There are no directions as to the wiring connections. I end up with two red and two black wires. I assume the two blacks are ground wires. Red I assume goes to the positive of which only one has a fuse. DO I need to add a fuse to the red wire...

2016 F350 super duty. Factory monitor does not switch over from backup camera. Camera has power. | Regarding the Custom Third Brake Light Camera for 8" Factory Monitor - Night Vision # 3460006, if your camera has the correct 12V power and you...

I have a 2017 Ford f-250SD XL. I installed your truck bed camera for the 4.2” screen. It works, but when I switch from the factory camera to the truck bed the screen splits with the bottom portion of the picture on top and the top of the picture...

Looking for a 3rd brake light camera to help when hooking up my 5th wheel to my 2022 Ford F-250. | We do have a 3rd brake light camera for your 2022 Ford F-250. The correct one will depend on what monitor size you have in your F-250. If you...

I am going to install a GCH Truck Bed Camera # 3460006 in my 2016 Ford F350, 8 foot bed, Super Duty Pick. I intend on using one of the upfitter switches for my power source. Can you tell me what the Amp draw is for this camera. I have two...

2020 F250 Lariat Super Duty with 9ft flatbed. Hello eTrailer I want to know if I connect this camera to the aux up-fitter switch on my truck, 1. will it turn the camera on to view the cargo bed without being in reverse? 2. can I access...

I have a 2018 Ford F-150. Will this camera pair with the trucks existing monitor? | The Furrion RV Observation Camera System part # FOS43TASF will need to be used with the monitor it comes with as it would not work with the factory monitor on...

Can you use the existing switches in the truck in stead of the the one that comes with the camera | The Custom Third Brake Light Camera for 4.2" Factory Monitor part # 3460002 which is a fit for a 2018 Ford F-350 Super Duty has its own built-in...

can the installed bed camera be turned slightly or is it permanently positioned at the factory angle? | The camera of the Custom Third Brake Light Camera for 8" Factory Monitor # 3460001 can be adjusted. Around the lens there are 4 indentations...

How do you adjust aim in the 3rd brake lamp camera 2018 GMC kit? We Have no instructions. We are looking for a bed view camera for a 2020 GMC Sierra k3500. Would like to incorporate into the factory screen as shown with a switch to change from...

Would it be possible to instead of using the switch that is provided to use the upfitter switches already in the truck? | Yes, you can use the upfitter switch on the dash of your 2015 Ford F-350 to switch the Custom Third Brake Light Camera...

My camera in the tailgate is viewed in the rear view mirror, will this camera require an additional monitor? | I spoke with GCH Automotive and the Truck Bed Cargo Camera for Aftermarket Monitor part # 3460016 for the Ram trucks is designed to...

What does the installation of this involve and what if any installation instructions are available/provided? | If you check out the second half of the review video I attached for the Truck Bed Cargo Camera for Factory Monitor # 3460015 you'll...

how can i use the aux switches instead of the supplied toggle switch | The Custom Third Brake Light Camera # 3460002 uses the supplied toggle switch as a power input to signal the module for switching to the optional 3rd brake light camera....