Swagman Quad Bike Rack for 2004 Mercury Mountaineer
Hi, We were looking for a 4 bike platform carriers. It looks like the Quad has extra features and some items like cable locks and anti rattle pins. Is there anything else needed for this carrier? Otherwise, I would be tempted to go with...
Can Stromberg Carlson Lift Back of 2007 Mercury Mountaineer & Trailer to Install Weight Distribution
I HAVE AN 07 MOUNTAINEER V8 PULLING A 91 JAYCO 28 FT TT WITH A EQALIZER HITCH..I HAVE TO JACK UP THE TT AND TV [ TT ATTACHED TO TV] TO INSTALL THE ANTI SWAY / WEIGHT DISTRIBUTION BARS. WILL THIS JACK WORK FOR ME? IT WILL HAVE TO LIFT THE TONGUE...
Can a 2 Inch Diameter Ball be Added to Pro Series Weight Distribution System # PS49583
The information shows for a 2 5/16 ball can it be switched to a 2inch ball | The Pro-Series weight distribution system # PS49903 comes with 1-1/4 inch diameter hitch ball hole. For a 2 inch ball you would need to add # A-90. Both the 2-5/16...
Is There A Class 4 Trailer Hitch Available For 2002 Mercury Mountaineer
I have a 2002 Mercury Mountaineer all wheel drive with a 8 cl 4.6 L engine. I want to find out if there is a way to custom fit a class 4 trailer hitch on this vehicle. It is rated to pull 7000 Lb and I just bought a Camper and the unloaded weight...
Inno Square Bar Roof Rack for 2003 Mercury Mountaineer
Does the cross bars in the kit come in the size specified? I want the 58 in ones... do i have to buy all pieces separate? | In order to get the longer bars, you'd order the parts separately. You'd need the roof rack feet, part # INFR and the...
How to Install Brake Controller in 2006 Mercury Mountaineer with Factory 4-Way
Where are the wires located to put in brake controller? Cant find anything online!?!?!?Would you possibly know the colors of them? Currently have a 4 pin flat connector for trailer lights. Thanks | You would need to convert the 4-way to a 7-way...
Recommended Towing Mirrors for a 2002 Mercury Mountaineer
I have a 2002 Mercury Mountaineer 4.6. Can you tell me if you have towing mirrors you can recommend. I have the lights on the bottom of the mirrors but would like to use the slip on towing mirrors. Is there anything I can do to modify them to...
Can a 2003 Mercury Mountaineer AWD V8 Automatic Transmission be Flat Towed Wheels Down
can you tow an 03 mecury mountaineer AWD v-8 automatic 4 down with a tow bar | According to my research your 2003 Mercury Mountaineer AWD V8 cannot be flat towed in its stock state. Although base plates are still offered to enable use of...
Brake Controller Installation Recommendation for a 2010 Mercury Mountaineer
2010 mountaineer class 3 hitch installed by Curt. Put a 7 pin wire plug in. Purchased the factory wire harness plug from the brake Prodigy. Do I need to run the wire from the brake controller to the 7 pin Wire plug. Or did Mercury install...
What Ignition-Controlled Circuit in 2001 Mercury Mountaineer Can Trigger Battery Isolation Solenoid
Do you have a wiring diagram how I can connect this to my 2001 mercury mountaineer? I just need to know where I can tap in to the ignition source.. | The simplest method to gain access to an ignition-controlled power circuit in your 2001 Mercury...
Should Disc Trailer Brakes be Added to Front or Rear Axle on a Boat Trailer
I have a tandem axle boat trailer, its an EZ Loader trailer without brakes. I believe its capacity is 4100 lbs. I have a Starcraft 22 ft aluminum hulled boat that I have towed for many years. I want to add disc brakes, can I just install...
Towing Capacity of 2004 Mercury Mountaineer with a Weight Distribution System
I have a 2004 Mercury Mountaineer AWD 4.0L V6 with a factory installed 1.25inch hitch receiver. I am wondering if I can tow a 4500lb camper with a weight distribution hitch OR do I need to add the 2 inch hitch receiver to the Mountaineer? |...
Recommended Ball Mount for a Mercury Mountaineer With 1-1/4 Inch Factory Hitch
Hello, I have a class 2 hitch that is 1 1/4, I need a 10 drop but having a difficult time in finding one. The Brophy drawbar is the closes I could find but it only has a 6 drop. Do you do any custom orders? Thanks, | I do have an option...
Does Draw Tite Front Hitch # 65032 Fit 2005 Mercury Mountaineer
Will this hitch fit the front of a 2005 Mercury Mountaineer without any loss? | The Draw Tite hitch part # 65032 is a confirmed fit for your 2005 Mercury Mountaineer. I am not totally sure what you mean by, "any loss" but if you mean ground...
Hitch and 2-5/16 Hitch Ball Recommendation for a 2002 Mercury Mountaineer
My suv has a 1-1/4 hitch receiver need the ball mount that goes into the receiver with a 2-5 /16 ball. | The problem is that the ball holes of ball mounts for a 1-1/4 inch hitch are all 3/4 inch in diameter and thd 2-5/16 inch balls are all...
Mounting Kit # TH04997 for a 1995 Thule Weekender Cargo Box on a 2002 Mercury Mountaineer
We purchased a newer car that has a factory installed roof rack including crossbars. I would like to use my existing older Thule box purchased in 95 on the factory installed roof rack by my current u-bolts are not wide enough. Is there a replacement...
Wiring the Hopkins Endurance Multi-Tow Trailer Connector # HM48470 on a 2001 Mercury Mountaineer
where do I connect the black wire from my vehicle ? | If the black wire on your 2001 Mercury Mountaineer is the 12V power wire from the vehicles battery you will want to connect that wire to the terminal at the eleven oclock position on the...
Trailer Hitch for a 2002 Mercury Mountaineer with Factory 1-1/4 Inch Hitch
I have a 2003 Mercury Mountaineer that I bought used from the original owner. It has a OEM hitch with a 1 1/4 receiver. I have looked at your model # 75132, however I would like to remove the OEM and replace it with another so that I dont have...
Are Specific Locks Able to be Keyed Alike and Also Have a Unique Key No One Else Has?
I get it the keys can be keyed alike. However Im looking to spend a lot of money to replace all my brand new locks that came on my brand new Thor coach BECAUSE their locks/keys are common ones that other coach owners have as well i.e. I could...
Installing Fuse Holder on Battery in Trailer Wiring Harness 118345 for 2000 Mercury Mountaineer
I have a 2000 mercury mountaineer and bought the 118345. I do not understand the instruction saying to connect the fuse holder to the battery. How do i do this? | The yellow fuse holder starts out as a closed loop. You will need to cut it in...
Parts Needed to Install Brake Controller on 2007 Mercury Mountaineer
Hello, I have a 2007 mercury mountaineer premier v8. It has a 1 1/4 hitch in the frame with a flat 4 wire connector. I have a class 3 hitch that I am installing underneath the existing class 2. I need to switch to a 7 wire connector as well....
How to Test a 4-Way Trailer Wiring Harness Plug
I installed a 4 way connector to a 4 way-7way adaptor on my 2000 Mercury Mountianeer. When testing the connector, the test light flashed for the left and right turn signals, but when I ed the tester probe into the 3rd female plug.and applied...
How Sturdy Is The Mount On The MaxxTow Off-Road Driving Lights?
How sturdy is the mount on this light? | The mount on the MaxxTow Off-Road Driving Lights # MT80637-2 itself is very sturdy. It is intended/designed for off-road driving conditions where the idea is durability. These lights can mount well...
Weight Distribution System For 1997 Mercury Mountaineer Towing Aspen Trail Trailer
Vehicle is 1997 Mercury Mountaineer, 6700lb max and I think 500lb tongue weight?. Trailer is Aspen Trail 2050QBWE, 460 tongue and 4300 dry, # C17341 my best option? The price is attractive for sure. | I was able to find the owners manual for...
Filter Your Search
Contact and Help