What Bolts are Needed to Mount Dexstar Vintage Trailer Wheel # AM20395
Published 11/12/2014
Products Featured in This Question
Question:
I am looking for bolts to attach a 15 inch rim to hub. what should I be ordering
asked by: Brian B
Helpful Expert Reply:
The Dexstar Vintage Wheel you mentioned, part # AM20395 is typically lug-centric, which means that it would mount to a hub that has wheel studs and would use lug nuts, not lug bolts. The wheel usually goes on a hub like part # 8-174-5UC3, which also uses clamps to join the hub to the rim.
If for some reason your existing hubs use lug bolts, you'd need to determine the length and diameter of the bolt needed as well as the thread pitch of the bolt. Since in my experience, these hubs usually have studs, I couldn't begin to tell you exactly what size bolt you need.
Product Page this Question was Asked From
Dexstar Vintage Steel Wheel w/ +5 mm Offset - 15" x 5" Rim - 4 on 9.44 - Silver
- Trailer Tires and Wheels
- Wheel Only
- 15 Inch
- 4 on 9.44 Inch
- Steel Wheels - Powder Coat
- Dexstar
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Recommended 14 Inch Wheels With 4 on 9.44 Bolt Pattern for 1975 Jayco Travel Trailer
- Q&A: Replacement Wheel Recommendation for a Vintage Camper Trailer
- Q&A: Need Replacement Wheel For 4 Bolt Dexter Axle on Old Hitchhiker Trailer With 225/75/15 Tire
- Q&A: Replacement Wheel for Old Vintage Wheel with 205/75-15 Size Tire
- Q&A: Dexstar Vintage Steel Wheel # AM20208 or Hub Upgrade
- Q&A: Spare 15 Tire And Wheel With a 4 On 9.44 Bolt Pattern
- Q&A: Will Dexstar Vintage Steel Trailer Wheel AM20208 Replace a 13 inch Dayton Fayette Wheel
- Article: Gooseneck to 5th Wheel Adapters
- Article: Where to Position the Trailer Axle?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Accurately Measure Trailer Leaf Springs