How to Wire Up a Trailer with Separate Taillights to a 4-Way
Question:
I have a time out trailer with a five pin connector with separate brake and turn lights, I need an adapter to separate the turn from brake lights from a 4 pin flat plug
asked by: Eric
0
Expert Reply:
You are going to need two thing, a taillight converter like part # 118158 and a trailer side 4-way like part # W787264.
You will need to cut the connector off of the trailer and then wire the # 118158 to the trailer wiring like the diagram I attached to the right shows and then wire the # W787264 to the wires on the input side of the converter.
click to enlarge
expert reply by: Jameson C
0
Products Referenced in This Question
Wesbar 4-Pole Flat Connector w/ Jacketed Cable - Trailer End - 4' Long
- Trailer Wiring
- Trailer Connectors
- Trailer End Connector
- 0 - 5 Feet Long
- Plug and Lead
- 4 Flat
- Wesbar
more information >
Product Page this Question was Asked From
Vehicle to Vehicle Tail Light Converter
- Tow Bar Wiring
- Splices into Vehicle Wiring
- Tail Light Converter
- Universal
- Tow Ready
more information >
Featured Help Information
Instructions
Similar Expert Q&A Pages
- How Can I Get Tail Lights on a Trailer with an Australian 7-Way Harness on My Trailer?
- What Powers The Diodes In A Diode Wiring Kit
- Recommended Wiring For Third Brake Light On Camper Shell
- Why are Diodes Needed for Lighting when Flat Towing a Vehicle
- How to Wire Up Snowmobile Trailer so that it Has Separate Turn Signals from Stoplights
- Installing Roadmaster Diode Wiring Kit # RM-15267 with Separate Wiring on RV and Towed Vehicle
- 2-wire to 3-wire Converter for Trailer Lights
- How to Get Third Brake Light Circuit for Trailer
- Converter Needed to Prevent Trailer Hitch 3rd Brake Light From Flashing when using Turn Signals
- Brake Lights are Dim With Turn Signal Flashing Using Converter 118158 On a Trailer
- Availability of Trailer Wiring Converter to Go From Combined Circuit to Separate
- How to Wire a Towed Vehicle With Seperate Turn and Brake Cicuits on Towing Vehicle
- Is Turn and Brake Circuits Separate on OEM Wiring for a 2018 Ram 1500
- 3 Wire to 2 Wire Converter to Combine Separate Brake Light and Turn Signal Circuits
- Troubleshooting Wiring on a Trailer with Separate Brake and Turn Signal Lights
- Converter To Provide Separate Brake And Turn Signals Functions On Trailer From A Standard 4 Pole
- Ways to Convert Trailer to LED Type Lighting
- How To Wire A Towed Vehicle When Both Vehicles Have Separate Stop And Turn Signals
- Recommended Converter To Split the Turn Signal From the Brake Signal
- Parts Needed to Connect European 7-Pin to U.S. 4-Way Flat
- Adapter for Truck Wiring To Wire Third Brake Light of Camper Shell
- Third Brake Light Stop Lamp Isolation Converter Compatible with LED Lights
- Can I Add a Separate Turn Signal Light to My Trailer
- Using Two Wire to Three Wire Converter Part # 118158 to Provide Third Brake Light for Trailer
- Converter Box for Separating Out Combined Trailer Wiring Circuits
- Installing Side Trailer Lights to Blink with Corresponding Turn Signal
- How To Connect 4-Way Trailer Connector On Motorcycle To Trailer With 5-Pole Round .
- 2-Wire to 3-Wire Converter for RV with Combined Lighting and Trailer with Separate Lighting