bing tracking image
Q & A Icon

Replacing a 1999 Onan 4KY Generator With a New QG 4000i in a 2000 Chinook Concourse  

Updated 11/16/2026 | Published 11/15/2026

Question:

I have an Onan Model 4KY FA26100J generator mfg. in 1999 that I will have to either rebuild or replace with a new generator. Since parts for the rebuild are about half the cost of a new generator, I am leaning towards just replacing the old generator. Are the electrical connections, gasoline fuel line, and exhaust in the same general locations or will I need to make modifications in order to install the new generator? Will the electrical connections just plug into the old RV connectors? This is on a 2000 Chinook Concourse motorhome getting the old generator out was a bit of a challenge, so fewer modifications is a plus. Thanks.

0
Onan Model 4KY FA26100J generator
Onan Model 4KY FA26100J generator
(click to enlarge)
Onan Model 4KY FA26100J generator
Onan Model 4KY FA26100J generator
(click to enlarge)
Onan Model 4KY FA26100J generator
Onan Model 4KY FA26100J generator
(click to enlarge)

Expert Reply:

Hey Michael, thanks for all the pictures! I compared the installation diagrams for your original Onan 4KYFA26100J and the newer Onan QG 4000i # CM66GR.

The good news is that your existing 8-pin remote-start harness will be compatible, and both generators use a 1/4" gasoline supply line. Your 12V battery cables will also be reusable, although the 120V output wiring will need to be reconnected of course.

However, this won't be a completely plug-and-play replacement. The newer generator has a different exhaust outlet location, mounting arrangement, and cooling air intake position. You'll likely need to reroute the exhaust using a kit like # CM85FV and possibly modify the mounting or compartment ventilation. Onan/Cummins made this switch when they came out with the newer generator design awhile back so there isn't a modern unit that won't require rerouting.

Overall, the # CM66GR is the best replacement option. Do you plan to do the install yourself?

expert reply by:
0
Andrew N
Michael G. profile picture

Michael G.

11/16/2026

Thank you, Andrew, for the detailed answer and the research you did to come up with it. We probably will be ordering the new generator and exhaust kit shortly. We will do the install ourselves with a friend and given the weight of the generator the John Deere tractor pictured! Appreciate the helpful, expert advice.

Andrew N. profile picture
Etrailer Expert

Andrew N.

11/16/2026

@MichaelG You're every welcome Michael! Happy to help. And nice, good luck with everything. That tractor will definitely help with moving the generators in and out. Let me know how everything goes or if you run into any concerns!

Product Page this Question was Asked From