How Can I Determine If My Bike Rack Will Clear My Bumper When I Fold The Rack Up?
Updated 11/15/2026 | Published 11/13/2026 >
Products Featured in This Question
Question:
I noticed in the YouTube video it showed a measurement indicating if there is enough clearance when the actual bike rack is installed if its good to fold up and not interfere with back of car, I dont have bike rack yet but what we are looking at is a fold up one when not in use, I just would like to know if thats going to be an issue with a 2025 Hyundai Tucson hybrid? Thanks Dave
asked by: DAVID A
Expert Reply:
Hey David, thanks for reaching out. You are thinking about this the right way. With a bike rack on a 2025 Hyundai Tucson Hybrid, the clearance between the bike rack and the bumper can be a potential issue. There are two measurements we will need to look at to determine if you will have clearance or not.
The first measurement is on the vehicle side, specifically, the distance between the hitch pin hole on your receiver and the rearmost edge of the bumper. On a 2025 Tucson, that measurement will be approximately 6". That is assuming you use a trailer hitch from a major brand like the etrailer # e38KR or Curt # C94WR.
The next measurement we will need to look at pertains to the bike rack. Specifically, the distance from the center of the hitch pin hole to the closest edge of the rack when folded up or down.
I am not sure exactly which bikes you have, or which rack you had your eye on, but for an example take the Hollywood Racks Destination Bike Rack # HLY94FR. With this rack folded up, the distance from the hitch pin hole to the closest part of the rack is 10". So, this rack would have plenty of clearance on your Tucson.
Was there a specific bike rack you had your eye on, and what kind of bikes do you have?

Dan
11/14/2026
You just gotta reference the measurements listed on the website. It can be a bit of a math exercise, but that’s what I did and I bought this hitch for my 2024 Tucson hybrid and I don’t have any clearance issues with my bike rack.

Judy L.
11/14/2026
Product: C94WR Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" This is the hitch we put on our 2025 Hyundai Tucson. The bike rack we have is Thule 9056 Camber 4-bike rack. There is no problem with bumper spacing. It all works great together!

Rm
11/14/2026
I installed this rack on a 2025 Tucson hybrid. I use a 1up Super Duty rack and it fit perfectly because the rack has a slot that allows you to adjust the depth that gets inserted into the receiver. Hope that helps!

Dennis C.
11/15/2026
I have a Kuat rack on my 2026 Tucson Hybrid, and it clears the bumper without any issues. Just keep in mind that when backing up with the rack in the upright position, the rear sensors will detect it and automatically apply the brakes. The remedy is simply to toggle the rear parking sensor off before you reverse.
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- For Towing
- Class III
- 525 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Is there a 2" Hitch for a 2026 Kia Sportage Hybrid?
- Q&A: Best 2" Hitch Receiver For 2026 Hyundai Tucson Hybrid N-Line
- Q&A: Trailer Hitch for 2026 Hyundai Tucson Limited Hybrid
- Q&A: Recommended Hitch for a 2026 Kia Sportage Hybrid
- Q&A: What Hitch Will Fit My 2025 Kia Sportage Hybrid For Bike Rack Use?
- Q&A: 4-Flat Wiring Harness For 2026 Hyundai Tucson Hybrid
- Q&A: Recommended Hitch and Wiring for 2026 Kia Sportage Hybrid
- Article: Trailer Hitch Installation Tips
- Article: How to Measure for Trailer Hitch Drop
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Choose the Right Trailer Hitch Class
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)



Mr. B.
11/14/2026
Most bike racks come out of the hitch with plenty of room to fold up the bike rack and store it in the upright position. Even if the hitch receiver is slightly under the bumper of the car, the rack will allow it to stick out past the vehicle to provide clearance from the rack to the bumper.