bing tracking image
Q & A Icon

Adapter Needed to Use Phoenix Faucets Swivel Aerator on 2025 Flagstaff E-Pro E19FD  

Updated 08/26/2026 | Published 08/20/2026

Question:

My travel trailer 2025 Flagstaff Epro E19FD The threads on this unit are too small for my faucet. Using a caliper, measuring over the top of the threads, both male and female, there is .012 inches difference with the male faucet thread being larger. They will not thread together. They both appear to have the same 27 threads per inch pitch. Any suggestions? I really would like to have the swivel spray feature. Thanks Ron

0

Expert Reply:

Hey Ron!

Thanks for taking those measurements. Since the faucet threads are slightly larger than the threads on the Phoenix Faucets Swivel Aerator # PF281022, I would not try to force them together. Even a difference of about .012" can be enough to prevent the threads from engaging correctly, and forcing it could damage or strip the threads on the faucet or aerator.

To help identify what adapter you may need, measure the outside diameter of the male threads by placing the caliper jaws across the widest part of the threads. For the female threads, use the smaller inside jaws of the caliper and measure across the opening at the threads. If you can send me both measurements to the nearest thousandth of an inch, I can help narrow down the thread size and see what adapter options are available.

If you happen to know the faucet brand or model number, that would help me identify the thread standard as well.

expert reply by:
0
Jerry B

Product Page this Question was Asked From