Recommended Triple Axle Disc Brake Conversion Kit w/ 6-Lug Hubs for 6,000 lbs Axles  

Question:

Expert Reply:

We sure do Steve and welcome back! For a disc brake conversion kit for a triple axle trailer, I recommend the DeeMaxx Disc Brake Kit w/ Actuator for Triple Axle Trailers item # DE77NR. This kit comes with everything you need to convert your triple axle trailer to a disc brake setup.

The DeeMaxx Disc Brake Kit for Triple Axle Trailers item # DE77NR is designed to fit 6,000 lbs axles that use a inner bearing item # 25580 and outer bearing item # 15123. You'll receive six hub and rotor combos with a 6 on 5-1/2 lug nut pattern. The rotors have a corrosion-resistant coating that is rated for salt water and fresh water use.

The DeeMaxx Disc Brake Kit item # DE77NR includes an electric-over-hydraulic actuator that is compatible with newer factory brake controllers along with aftermarket ones so long as they have an EoH setting. All the necessary brake lines, fittings, and brackets are part of this kit as well.

What kind of trailer do you have and does your tow vehicle have a factory brake controller or aftermarket?

expert reply by: Jerred H

0

DE77NR
(click to enlarge)

Steve

8/6/2026

Thanks Jered! Just what I needed to know. It's a boat trailer and I'm pulling it with a Silverado 2500 that has a Red Arc elite.

Jerred H.

8/6/2026

@Steve You're welcome! You're all set then! The Tow-Pro Elite is definitely compatible with triple axle EoH setups.