Upgraded Equalizer For Camper Trailer With Dexter 20-H-12-6

Updated 06/24/2026 | Published 06/21/2026

Products Featured in This Question

MORryde ALLTREK 4000 Shock Absorbing Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K

(96)

$343.95

MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps

(2325)

$125.09

MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps

(2325)

$123.08

Question:

Does etrailer have a Cushioned Equalizer that will fit in place of a stock dexter DEXTER EQUALIZER 20-H-12-6 RV CAMPER TRAILER? The bottom hole spacing is 6-1/8 or 6-1/4. Top hole to center line of bottom holes is 4. Thank you, Mike

asked by: Michael M

Expert Reply:

Hey Mike! Thanks for providing that information. The closest match to your measurements is the MORryde ALLTREK 4000 Shock Absorbing Equalizers for Tandem Axle Trailers # MR89DR. These measure 6-1/2" left to right on center, and 4-1/2" top to bottom. The additional height and length is minor, so it won't throw off your suspension geometry.

While you're at it, I also recommend adding the MORryde Suspension Upgrade Kit for Tandem Axle Trailers. This comes with wet bolts, bronze bushings, and 1/2" thick shackles. The right kit depends on your current shackle strap measurements. If they're 2-1/4" on center you need # MR46ZR and for 3-1/8" # MR76ZR.

What kind of trailer do you have?

expert reply by: Robin H