Can I Run My Microwave And AC Unit At The Same Time On Rpod With 3,000 Watt Generator?
Published 06/17/2026 >
Products Featured in This Question
Question:
Can I run my microwave and air conditioner at the same time with the Flex Power 3300-watt generator? On forest river r pod teardrop.
asked by: Travis
Expert Reply:
Hey Travis! I would not plan on running an RV air conditioner and microwave at the same time with the Flex Power 3,300-Watt Portable Inverter Generator # FP54FR.
The generator is rated for 3,300 starting watts and 2,700 running watts, which gives you a useful amount of power for a 30 amp camper, but RV microwaves and air conditioners are both high-draw appliances. The A/C also has startup surge when the compressor kicks on, so stacking a microwave on top of that can push the generator past its available capacity pretty quickly.
The better way to use the # FP54FR is to run one major load at a time. For example, let the A/C run by itself, then turn it off or let it cycle down before using the microwave, coffee maker, toaster, or hair dryer. If you are really wanting to keep both on at the same time, you'll need a more capable generator like the Onan 4,500-Watt # CM76MR.
What A/C and microwave models are you working with?
Product Page this Question was Asked From
Flex Power 3,300-Watt Portable Inverter Generator - Gas - Manual Start - 30 Amp RV & 120V GFCIs
- Generators
- Inverter
- Gas
- 2001 - 3000 Watts
- Portable Generator
- 120V Output
- Carbureted
- Recoil Start
- Flex Power
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Which Dometic soft start do I need for Penguin II AC? DMC52RR vs DMC77RR
- Q&A: Availability of Curt Ball Mount w/ Sway Control Tab For 2" Hitch
- Q&A: Best Weight Distribution System Option for V-Nose Trailer
- Q&A: Trailer Wiring for 2020 Jeep Grand Cherokee Without Factory Tow Package
- Q&A: Replacement Disc Brake Caliper for Reliable CL-1000
- Q&A: Does the 2025 Jeep Grand Cherokee Have a Plug and Play Adapter for a Brake Controller?
- Q&A: Looking for 6 Galvanized U-Bolts that are 3 Inches Square with 7/16 or 1/2 Inch Diameter

