Recommended Fairing for a 48" Roof Rack Systems

Updated 06/17/2026 | Published 06/15/2026

Products Featured in This Question

Inno Fairing for Roof Racks - 48" Long - Black

(25)

$120.06

Question:

We have a Rhino-rack 48 roof rack system from you and are looking to add a fairing. Would you recommend your Inno INA262?

asked by: Michael N

Expert Reply:

Good question Michael, thanks for asking!

To verify whether the Inno Fairing # INA262 is the right fit for your 48" Rhino Rack system, you'll want to compare the fairing width to the usable width of your front crossbar.

The Inno Fairing is designed for crossbars that are 39" to 48" wide. So you'll measure the distance between the mounting points on your front crossbar, that's the area where the fairing clamps would attach.

You'll also want to verify that there is enough space between the roof and the underside of the crossbar for the fairing brackets to install.

If your front crossbar is between 39" and 48" wide and there is sufficient space beneath the bar for the mounting hardware, the Inno Fairing should be a good fit. If your bar is wider than 48", you may want to consider a wider fairing for better coverage and wind noise reduction.

What do you usually carry on the Rhino Rack?

expert reply by: James D