Looing for Replacement the Taylor Made Dock Post Bumper
Updated 05/22/2026 | Published 05/20/2026 >
Products Featured in This Question
Question:
Im looking for the Taylor Made dock post bumper Part 36945652 I have 2 inch metal dock posts. I currently have a couple of Taylor Made 2inch bumpers that look just like the ones in your store. My current bumpers will accept a piece of 2inch PVC pipe that fits over the dock post and through the bumper Top opening of the bumper Note the post bumpers with PVC in the picture. The outer diameter of the PVC is 2-3/8 inch. Will this PVC fit into the bumpers you sell? If so, I will be looking at 3 blue bumpers. Feel free to call me if needed. 734.777.1072 Thanks, Mike
asked by: Michael C
Expert Reply:
Hey Michael,
The details and photo you attached were really helpful. The Taylor Made black dock post bumper # 36945652 is best fit for your 2-3/8" PVC pipe.
Unfortunately, we do not have that larger size bumper available in blue. The blue versions are only offered for some of the 1 1/2" post.
What style of boat are you protecting at the dock?
Product Page this Question was Asked From
Taylor Made Dock Post Bumper for 2-1/4" Diameter Dock Pipes - 15" Tall - Black Vinyl
- Boat Dock Bumpers
- Dock Bumpers
- Post Bumper
- Vinyl
- 6 - 10 Inch Wide
- 0 - 2 Feet Long
- Black
- Taylor Made
more information >
Continue Researching
- Shop: Taylor Made Dock Post Bumper for 2-1/4" Diameter Dock Pipes - 15" Tall - Black Vinyl
- Q&A: Dimensions of Dock Bumper part # 36945652
- Shop: Taylor Made Dock Post Bumper for 1-1/2" Diameter Dock Pipes - 17" Tall - Blue Vinyl
- Video: Taylor Made Dock Post Bumper for 2-1/4" Diameter Dock Pipes Feature Review
- Q&A: Suspension and Trailer Tire/Wheel Combo Recommendation for Boat Trailer with 3.5K Axle
- Q&A: Correct Leaf Spring Hanger Position for Single Axle Trailer
- Article: The Best Boat Bumpers



Michael C.
5/22/2026
15' Starcraft Aluminum deep V fishing boat. On my side of the dock, the 2" PVC will insert into the bumper (Like the pic) but stick up approx. 12" and caped. This gives added protection when hit with incoming waves. We currently use this style bumper on the other side of the dock. We have 2" dock poles, so the bumper fits a bit loose. The short piece of 2" PVC (OD = 2.375") secures it nicely from waves lifting it up and off. Are dock sides are aluminum, so I don't secure them with screws. What colors do you have in the 2.375" size?