bing tracking image
Q & A Icon

What Bronze Bushings Go With The 4-Leaf Double-Eye Spring DX23CR  

Updated 01/27/2026 | Published 01/06/2026

Question:

I want to use bronze bushings with this. Which ones do I order and how would I lubricate them? Thanks!

0

Expert Reply:

Hello Reuben, thanks for reaching out. We do have a bronze bushing that will work with the # DX23CR Leaf Spring. For that you will need the following:

- Bronze Bushing - 9/16" Inner Diameter, 11/16" Outer Diameter - 1-3/4" Long - Qty 1 # D014-077-00

These must be used with wet bolts, since that is how they are lubricated. A wet bolt like part # MR52HR would work great. These are typically sold as a full suspension kit that comes with shackles, bronze bushings and wet bolts. For example, the MORryde Suspension Upgrade Kit for Tandem Axle Trailers # MR46ZR comes with 2-1/4" long shackles, wet bolts and bronze bushings. We will just need to make sure the 2-1/4" shackles are correct for your trailer. What shackle length do you have currently? They are measured center hole to center hole. Typically getting the whole kit is more cost effective too.

expert reply by:
0
Jesse M
Jesse M. profile picture

Jesse M.

1/27/2026

Hey Reuben, did you get a chance to check the shackle length on your trailer for the leaf spring setup? Knowing what worked with the bronze bushings and wet bolts could really help others planning a similar upgrade. Your update could make it easier for the next person with the same issue.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>