Is 90 Degree Adapter Needed with Aquafresh RV Heated Water Hose for RVs
Updated 12/04/2025 | Published 11/30/2025
Question:
2024 Forest River Wildwood FSX Platinum 290RTKS Toy Hauler. I am new to camping in the winter and wanted to know if you need to have a 90 degree brass fitting on your city water connection to connect the hose to so that it does not twist or bend? Also do you need to have pigtails from the hose heating element to wrap around the brass fitting if needed to keep the water from freezing in it before entering into the RV? Thanks, Holly
asked by: Holly B
Expert Reply:
Hey Holly, you do not need a 90 degree bend or any type of additional fitting to use the AquaFresh Heated Drinking Water Hose # W01-5350 and you can attach it directly to the RV. This also generates enough heat that you would not need to worry about anything inside of the hose from freezing or any adjacent fittings.
Product Page this Question was Asked From
AquaFresh Heated Drinking Water Hose for RVs - 50' Long x 1/2" Diameter - 120V
- RV Water Hose
- 50 Feet Long
- 1/2 Inch Diameter
- High Pressure
- Safe for Drinking
- Heated
- Blue
- AquaFresh
more information >
Continue Researching
- Article: Thank you!
- Q&A: Can Multiple W01-5315 Heated Water Hosed Be Connected Together
- Q&A: Does the Heating Element Run the Length of the AquaFresh High Pressure Heated Hose
- Q&A: Which Sidewinder Will Replace Lippert Rhino Pin Box
- Q&A: Recommended Replacement Trunnion and Pin for Reese Weight Distribution Systems
- Q&A: Replacement Motor for Kwikee 32 Series Steps on a 2002 Eastwood Discovery
- Q&A: Parts Needed To Connect A Macerator Hose To A Dump Station Waste Drain
- Q&A: Removing Front Glass Section of Greystone 32" Electric Fireplace with Crystals # 324-000076
Holly B.
12/4/2025
Thank you