Recommended 5th Wheel Rails for a 2024 Ford F-250 w/out the Puck System

Question

Question:

could someone contact me about a rail system

asked by: William D

0

Expert Reply:

Hey William. To add a set of 5th wheel rails to your 2024 Ford F-250, I recommend the B&W Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches item # BWRVK2402. These custom fit brackets mount to existing holes in your truck's frame. They fit both the 6-1/2' and 8' bed models without the factory puck system. The rails will work with B&W, Curt, Demco, Reese, Anderson and PullRite 5th wheel hitches and accessories.

To make towing with a 5th wheel easier, I recommend adding the Curt 5th Wheel/Gooseneck Custom Wiring Harness item # C57010. This harness puts a 7-way connector in the bed of your truck and allows you to keep the one on your bumper. This makes hooking up to your 5th wheel trailer easier and more convenient.

Are you also needing a 5th wheel hitch? If so how long is your F-250's bed?

You can add this information and any other questions you have where it says Reply to Jerred H and I'll be happy to answer them.

expert reply by: Jerred H

0

B&W Base Rails
(click to enlarge)

William D.

11/12/2025

Jerred, Thanks for getting back to me. Problem with that is i already have the puck system installed in my truck. My friend has a B and W hitch that uses rails. I was looking for a way to mount that hitch and save a bunch of money. I am currently researching a Demco adapter. It is a rail system that hooks into the puck system. Any info on that or similar would be appreciated. Thanks

Jerred H.

11/12/2025

@WilliamD You're welcome and thanks for that additional information. Your friend's hitch sounds like it's either the B&W Patriot 5th Wheel Trailer Hitch w/ Slider item # BWRVK3270 or the standard Patriot item # BWRVK3255. The Demco 5th Wheel Rail Adapter for Ford OEM 5th Wheel Towing Prep Package item # DM6175 is exactly what you need. It's going to drop right down into your puck system and provide you with a base similar to 5th wheel rails. Either Patriot hitch will mount right to it. Additionally, the Demco item # DM6175 is the only puck system adapter for Ford trucks that actually works with the Patriot Slider item # BWRVK3270. The slider base bottoms out on the rest of them.

Answer 1

Hey Clayton, thanks for reaching out! The bolts on the side of the pin box should not be loosened. I know the arrows are a little confusing and seem to indicate adjusting will somehow control the chucking, but that is not the case. They are just a…

view full answer...

Answer 2

The B&W Universal Base Rails and Installation Kit for 5th Wheel Trailer Hitches - 10 Bolt #BWRVR3200 will fit your 2018 Ford F-250 with aluminum bed but B&W doesn't recommend it. You will want to use some sort of spacers/isolators that…

view full answer...

Answer 3

The B&W Patriot slider fifth wheel hitch #BWRVK3270 that you referenced weighs a total of 220 lbs. While that is a lot of weight what's great about the B and W hitches is that they break down into smaller sections easily to help distribute…

view full answer...

Answer 4

Since your Ford F-250 is a 6-3/4-foot short bed and your Grand Design Reflection 29RS 5th wheel does not have a tapered nose for increased turning clearance you will need a slider hitch to be able to safely make tight turns, or you can install a…

view full answer...

Answer 5

Yes, it will! The B&W Patriot 5th Wheel Trailer Hitch w/ Slider item #BWRVK3270 attaches to industry standard 5th wheel rails. Since you're driving such a newer truck and using a Reese 16k hitch already, I seriously doubt the rail system you…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Recommended 5th Wheel Rails for a 2024 Ford F-250 w/out the Puck System

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching