Does Inno Rack INTR Fit 2019 Lexus GX 460

Question

Question:

I have the Inno IN-TR rack and the TR152 feet and I cant get it to fit on my 2019 GX460.

asked by: Luke G

0

Expert Reply:

Hey Luke, the issue is the foot kit you have INTR is not a fit for your 2019 Lexus GX 460. What does the roof of your vehicle look like? Does it have raised bars that run front to back?

expert reply by: Jameson C

0

Luke G.

8/5/2025

It has the raised rail. Your website still has the TR152 listed as an accessory to the INTR as being compatible for the 2019 GX460.

Jameson C.

8/5/2025

@LukeG That fit kit was designed for different version of the vehicle roof. Inno doesn't have any roof rack fits for the raised rails of your vehicle so you'd need a different rack like the Yakima part # Y62GD which does fit and would work great.

Luke G.

8/7/2025

The TR152 IS THE RAIL adapter for the Lexus GX. The problem is the combination of the two which does not provide enough vertical clearance for the rectangular cross bars which does not allow the keyed cover to be installed. Yes, the video is not by etrailer because the parts that were sent to me DOES NOT FIT. I have forwarded the same photos to Inno to get feedback from them since etrailer certainly does not know of this problem. Check your website, the INTR and TR152 parts are still listed as being compatible with the GX460 and BTW, the roof rail on that car does not come any other way.

Jameson C.

8/7/2025

@LukeG I just checked and on our site the # INTR is not a confirmed fit for your GX460 but we do have a similar Inno rack but it's for the flush rail versions of the vehicle and not raised rails like you said you had. The complete Inno square bar roof rack we have that fits flush bar versions of your vehicle is the part # IN99XR which uses the IN-XP feet instead.

Answer 1

Hi Rick; assuming you have the flush mounted rails on your 2019 Lexus GX 460 you can use the Inno system to mount your Thule bars. The Inno and old Thule square bars are the same. You will need the Custom Fit Kit #INTR152 along with the Inno Feet for…

view full answer...

Answer 2

Those parts are only available with the Fit Kit #INTR152 for your 2022 Lexus GX 460. These will attach to your Feet #INXS350 and Crossbars #INXB138-145.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hello John, thanks for reaching out. Yes, we do have a Thule roof rack that will allow you to install the Hullavator #TH898 on your 2015 Subaru Forester. For that I recommend the following: - Thule WingBar Evo Roof Rack for Raised Rails - Aluminum -…

view full answer...

Answer 6

According to the installation instructions for the Landing Pad 30 for Yakima SkyLine And Control Towers #Y25ZR, you will have to remove the flush mounted side rails to mount the landing pads. I do have another option for you that does not require the…

view full answer...

Answer 7

The roof rack I highly recommend for your 2020 Lexus GX 460 is from Inno because it will give you the most available crossbar space of any rack that fits your vehicle. Longer crossbars are important because they make it easier to load your…

view full answer...

Answer 8

Those are some great questions, Dave. The Landing Pad 30 #Y25ZR will require you to remove the factory flush rails and the kit includes 6 mounts so you would be able to reposition the crossbars to front, middle or rear. Or you could get a 3rd…

view full answer...

Answer 9

Hey Henry, The best option for you is the Yakima SkyLine Roof Rack #Y59TB because it mounts to your 2023 Lexus GX 460 without you needing to take the OEM flush rails off. It also gives you the ability to carry a wide variety of accessories, think…

view full answer...

Answer 10

Good morning, Doug. I do have a potential solution for you, but I am sorry to say that Thule does not make a fit kit for the 2016 Lexus GX460. So, there is unfortunately no way to mount your Thule Evo bars on this vehicle. Our best option would be to…

view full answer...

Answer 11

The correct length Inno Aero Crossbar for a 2015 Lexus GX 460 is 48" for the front and 51" for the rear. The complete kit is composed of part #INXB123-130, part #INXS350, and part #INTR152. Unfortunately, the crossbars have channels…

view full answer...

Does Inno Rack INTR Fit 2019 Lexus GX 460

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching