Looking For Hub And Drum For Lippert 7,000 lb Axle V000448334 On 2019 Vanleigh Vilano 369FB

Updated 09/08/2025 | Published 06/03/2025

Products Featured in This Question

Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased

(1243)

$134.90

Easy Grease Trailer Hub and Drum Assembly for 5.2K - 7K Axles - 12" - 8 on 6.5 - Pre-Greased

(1743)

$123.32

Question:

Looking for a hub and drum, 8 on 6 1/2inch bolt pattern, for a Lippert 7000lb axle V000448334. RV is a 2019 Vanleigh Vilano 369FB.

asked by: Brian

Lippert 7000lb axle V000448334
(click to enlarge)

Expert Reply:

Hello Brian, thanks for reaching out. Our records show the Lippert V000448334 is a standard 7,000 lb axle that uses the # 25580 (1.75" ID) inner bearing and 02475 (1.25" ID) outer bearing. I do suggest you remove a hub and confirm this is what you have. If so, the hub you need is the following:

- Easy Grease Trailer Hub and Drum Assembly for 5.2K - 7K Axles - 12" - 8 on 6.5 - Pre-Greased # AKHD-865-7-2-EZ-K

This hub uses 1/2" studs. I was not able to find a reference for your axle part number that told me the stud size for the hub so please confirm this is what you have. If you need 9/16" studs use part # AKHD-865-7-1-K.

Are you needing new brakes too? Or just the hub?

Reply on this page and let me know if there is anything else I can do to assist.

expert reply by: Jesse M

Easy Grease Trailer Hub and Drum Assembly for 5.2K - 7K Axles
(click to enlarge)

Jesse M.

9/8/2025

Hey Brian, did you have a chance to check if the hub you have matches the bearings and stud size I mentioned? I'm asking because I want to make sure you get the right parts for your setup.