Parts Needed To Add 4-Flat And 7-Way To 2013 Honda Pilot  

Question:

Expert Reply:

Hello Steve, thanks for reaching out. We do have the parts needed to add a 4-flat and 7-way combo to your 2013 Honda Pilot. There are two separate kits you will need. Here is what I recommend:

- Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector # C56170

- Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires # ETBC7

These two kits combined will contain everything you need to add a 4-flat and 7-way to your Honda, including all of the necessary wires for a brake controller. For that, the Tekonsha P3 # 90195 is what I recommend.

Please let me know if there is anything else I can do to help.

expert reply by: Jesse M

0

Jesse M.

9/26/2025

Hey Steve, did you get a chance to install the 4-flat and 7-way combo on your Honda Pilot with the kits I recommended? I'm asking because your experience could really help others looking to do the same upgrade.

Steve R.

9/26/2025

@JesseM I installed the 4 pin trailer connector and it works great. The installation was very easy and straightforward. The best upgrade for the pilot.

Jesse M.

9/29/2025

@SteveR Yes Honda does make it especially easy to add the 4-flat to many Pilot models. Easier than most at least. Plus you still have the option of upgrading that to a 7-way if the need ever arises. That would require a bit more wiring work, but it is not terribly difficult. Feel free to come back if you ever need anything!