Recommended Brake Controller for a 2005 Dodge 1500
Published 11/22/2024
Products Featured in This Question
Question:
I need to install a brake controller in my 2005 Dodge 1500 5.7L SLT 4x4, what controller and adapter? would I need for this? How can I locate the plug under the dash if there is one? I am in California if that makes a difference. Once installed, how do I know if it is working? It will be used to tow a gooseneck 2002 Fleetwood Wilderness Lite 24 5C. Thank you in advance!!
asked by: Abby
Expert Reply:
Hey Abby thanks for all the questions! The first thing I need to mention is you will only have a port to plug in a brake controller if your 2005 Dodge 1500 came with either a 4-way connector or a 7-way connector from the factory. If yours has an after market trailer connector you'll need to manually wire a brake controller.
The brake controller port on a 2005 Dodge 1500 is located by the left side firewall. I have attached a picture below along with an installation video so you can find yours.
If you have a factory trailer connector, I recommend the Tekonsha Primus IQ Trailer Brake Controller item # TK68HR. This proportional brake controller will install with the included plug in adapter. The Primus works by slowing or stopping your trailer with the same amount of force your truck is stopping with. This is the safest way to stop, as it is immediate, but also the easiest on both your trailer and truck.
I am a big fan of the Primus IQ item # TK68HR because I have had it for years and have had no issues whatsoever with it. It's affordably priced, doesn't have a bunch of complicated features, and is most importantly reliable.
If you do not have a factory trailer connector you will want the item # TK90160. This is the same Primus IQ brake controller but without the plug in adapter. It includes a universal wiring harness that will need to be spliced into your Dodge's wiring.
There's no California restrictions. You'll need to install the brake controller and plug your trailer into it to know it's working.
If you do not already have a gooseneck hitch, I recommend the B&W Turnoverball w/ Custom Installation Kit item # BWGNRK1316. This fits both the 6-1/2' and 8' bed models and is one of the most reliable systems in the towing industry.
(click to enlarge)
Product Page this Question was Asked From
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Dodge
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Vehicle Specific
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Brake Controller
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller w/ Custom Harness - Up to 4 Axles - Proportional
- Q&A: Locating the OEM Wiring Warness to Plug in a Brake Controller on a 2004 Dodge Ram 1500
- Q&A: Where Does a Brake Controller Plug Into on a 2006 Dodge Ram 1500 Big Horn
- Q&A: Plug And Play Pigtail For The Tekonsha P3 Brake Controller On A 2006 Dodge Ram Pickup
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What are Mounting Angle Requirements for Install of Prodigy P3 Brake Controller
- Q&A: Brake Controller Connector Location in 1997 Dodge Ram
- Article: Electric Brake Controller Installation on Dodge Ram Trucks to 2012
- Q&A: What is the Difference Between the Tekonsha Prodigy P2 and the P3 Brake Controllers
- Q&A: How Often Should Bearings Be Greased And How Much Grease Should I Add?
- Article: Brake Controller Installation: Starting from Scratch
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Measure for Travel Trailer and Fifth Wheel Steps
- Article: How to Charge a Dump Trailer Battery
Abby
11/22/2024
Thank you Jerred! I found the blue receptacle mounted on the top of that box there so looks like I only need the plug in one and no rewiring. Yes we have the B&W 1316 already thank you for the reccomendation!