Recommended Tow Bar Wiring Kit For Flat Towing A 2024 Ford Bronco

Updated 11/13/2024 | Published 10/31/2024

Products Featured in This Question

Roadmaster Smart Diode Kit for Variable Voltage Incandescent Tail Lights

(144)

$146.30

etrailer SD Non-Binding Tow Bar for Roadmaster Direct-Connect Base Plates - RV Mount - 6,000 lbs

(304)

$850.05

Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Coiled Adapter Cord

(3183)

$179.96

Roadmaster Battery Charge Line Kit for Towed Vehicles

(1199)

$45.63

Roadmaster Smart Diode Kit for Variable Voltage Incandescent Tail Lights - 7-to-6-Way Adapter Cord

(144)

$319.57

Roadmaster Smart Diode Kit for Variable Voltage LED Tail Lights - 7-Way to 6-Way Adapter Cord

(287)

$268.84

Roadmaster Stop Light Switch Kit

(622)

$77.88

Roadmaster Direct-Connect Base Plate Kit - Removable Arms

(3324)

$575.00

Roadmaster Direct-Connect Base Plate Kit - Removable Arms

(3324)

$575.00

Demco Air Force One Flat Tow Brake System for RVs w/ Air Brakes - Proportional

(493)

$1329.00

Demco Stay-IN-Play Duo Flat Tow Brake System for RVs w/ Hydraulic Brakes - Proportional

(754)

$1175.00

Question:

I have a 2024 Bronco that I want to tow with my 2020 Newmar New Aire. can you tell me which wiring kit I need?

asked by: Gary W

Expert Reply:

Hey Gary,

For the wiring you'll need the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267. This will transfer your motorhome's traffic signals to the tail lights of your Bronco. If you find that you have variable voltage tail lights (one wire used for the signals instead of separate wires) then you'll need part # RM38FR for LED lights or # RM26FR for incandescent.

If you haven't pick out the rest of your flat towing components then I have the following recommendations for your 2024 Ford Bronco:

Baseplate: If you have the factory plastic bumper you'll need the Roadmaster Direct-Connect Base Plate Kit # RM79RR. If you have the modular steel bumper you'll need the # RM92ZR instead.

Tow Bar: etrailer SD Non-Binding Tow Bar for Roadmaster Direct-Connect Base Plates # e74ZR. This tow bar comes with safety cables bracketed to the arms so you won't have to purchase them separately or worry about them dragging on the ground. The head/shank has a built in rise/drop to help keep the tow bar level between the motorhome and Bronco so you hopefully don't have to purchase an high/low adapter as well.

Braking System: If your New Aire has hydraulic brakes then you'll want the Demco Stay-IN-Play Duo # SM99251. This system will need to tie into the cold side of the brake light switch for your Bronco which isn't useable so you'd need to install stop light switch kit # RM64TQ and tie it to the indicator light for the # SM99251.

If your motorhome has air brakes instead then you'll just need the Demco Air Force One # SM99243.

It's not required but I do recommend also installing a charge line kit # RM-156-25 to avoid any potential dead battery issues while flat towing.

expert reply by: Kevin C

Jody S.

11/12/2024

Is this set up good for the 2024 four-door bronco?

Kevin C.

11/13/2024

@JodyS Yes, you'll just want to check if you have variable voltage tail lights to see what diode kit you'll need to transfer your light signals and you'll need to choose the correct baseplate based on your bumper type. I've listed out the options for these above so there shouldn't be anything else you'll need.