Although I wasn't able to confirm the measurements of the mounting points on the Bestop TrailMax II # B3944137, my contact at Bestop was able to confirm that the bench itself measured 33-1/2" from one side to the other lengthwise. view full answer...
According to my contact at Bestop the overall width of this rear bench seat is 41-inches.
The Bestop TrailMax II Fold & Tumble Vinyl Rear Bench Seat # B3943537 fits 1997-2006 Jeep Wranglers except for TJ Unlimited models. The installation instructions are linked for your reference. view full answer...
I have attached a photo of the Bestop TrailMax II Fixed - Vinyl Rear Bench Seat, part # B3943715. As the dimensions show in the photo, the seat measures 22-1/2 inches tall from the bottom of the seat to the top of the back. Since it is mounted on brackets to the floor I was unable to measure the height from the floor to the bottom of the seat.
This is a bolt-on installation and features mildew and UV resistant Black Denim vinyl fabric. The seat is 33-1/2 inches wide and from the front... view full answer...
I spoke with my contact at Bestop who gave me the following dimensions for the Bestop TrailMax II Fold & Tumble # B3943915:
Base:
Length - 40-1/2"
Depth - 20"
Cushion Thickness - 5-1/4"
Backrest:
Indented Length - 30" (longer part measures 40-1/2")
Height w/o Headrest - 10"
Height w/Headrest Up - 26"
Height w/Headrest Down - 23"
I have attached a photo giving the basic dimensions for you to check out. Please note that this is designed to fit 1997-2006 models of the Jeep... view full answer...
Overall width of the bottom part of the seat on the Bestop TrailMax II Fold and Tumble # B3943501 measures 33-1/2 inches. Front to back the lower portion measures 20 inches.
The height of the upper section measures 22-1/2 inches without the headrests. With the headrests up it measures 31 inches and with them pointed down 28 inches.
I attached a dimension picture that shows these measurements on the gray colored version of this seat. view full answer...
The Bestop TrailMax II High Back Seat you mentioned, part # B3943615 is a full height seat, as opposed to the low back seats you currently have.
The seat is designed to fit over the original seat's riser and for your particular model year, no adapter would be required.
The matching rear seat would be the TrailMax II fold and tumble in Black Denim, part # B3944015. view full answer...
The seat for the Bestop TrailMax II Sport Vinyl Front Seat # B3943401 has a width of right at 20-1/4 inches. Front to back the seat measures 20 inches. It is a confirmed fit for the following vehicle models:
1976 - 1986 Jeep CJ-7
1997 - 2006 Jeep TJ
1987 - 2003 Jeep Wrangler
1987 - 1995 Jeep YJ
2004 - 2006 Jeep Wrangler excluding Unlimited
2004 - 2006 Jeep Wrangler Unlimited
I have attached the written installation manual for this seat that you can also look through. view full answer...
The measurements of product number B3942937, the Jeep Trail Max II Classic Seat are 23-1/4 inches tall and 20-3/4 inches wide. I was not able to get a depth measurement. view full answer...
The back section of the Bestop TrailMax II High Back Seat you mentioned, part # B3943615 that you referenced measures 22-1/2 inches without the headrests.
With the headrests all the way up the overall height is 31 inches, with them pushed down as far as they will go it measures 28 inches.
You would have to compare that dimension to the height of your current seat to know if this would be taller or not. view full answer...
According to my Bestop Representative, their TrailMax II fold and tumble rear bench seat measures 33 inches wide, exactly. The seat is a bolt-on fit for Jeep CJ and Wrangler models from 1955 through 1995. view full answer...
I spoke to my contact at Bestop and she gave me the dimensions of the Bestop TrailMax II Pro # B3946137. The height is 35 inches, the width is 21 inches, and the front to back dimension of the base of the seat is 21 inches. view full answer...
I reached out to my contact at Bestop to get the dimensions you asked for on the Bestop TrailMax II Fold & Tumble - Fabric Rear Bench - Charcoal # B3944109. It is 33-1/2 inches wide, 16-1/2 inches seating depth, 17 inches tall without headrests, 23 inches with headrests and 26 inches with headrests fully extended. When the back is folded down you will be at about 24 inches deep. I've updated the picture to show these dimensions. view full answer...
I spoke with my contact at Bestop and he gave me most of the dimensions you asked about. He did not have the distance between the mounting brackets but he did have the other dimensions.
Overall width of the bottom part of the seat measures 33-1/2 inches. Front to back the lower portion measures 20 inches.
The height of the upper section measures 22-1/2 inches without the headrests. With the headrests up it measures 31 inches and with them pointed down 28 inches. view full answer...
The Bestop TrailMax II Sport # B3943837 that you referenced measures 20-1/2" wide, 35" high, and 21" from front to back. It fits the following vehicles:
1976 - 1986 Jeep CJ-7
1997 - 2006 Jeep TJ
1987 - 2003 Jeep Wrangler
1987 - 1995 Jeep YJ
2004 - 2006 Jeep Wrangler excluding Unlimited
2004 - 2006 Jeep Wrangler Unlimited view full answer...
On a 1977 Jeep CJ-7 that has the original seat riser the Bestop Low Back Bucket Seats # B3942937 (spice color) and # B3942901 (black) are direct fits. Only for certain later models years, 1997 through 2006, are adapters required to install these non-reclining bucket seats.
We do not happen to have these two items in stock for me to measure their mounting hole spacing so I called Bestop. My contact there advised that the side-to-side dimension for the hole spacing is 15-1/16-inch. He... view full answer...
Both the Bestop TrailMax Vinyl Rear Bench Seat # B3944001 and the black denim version # B3944115 use the same waterproof closed-cell high-density foam in their construction. The difference is that the black vinyl seat # B3944001 has a smoother surface that will tend to allow water to run off (or be wiped off) better than with the black denim seat since that fabric has a more porous surface. Both are a confirmed fit for your 1969 Jeep CJ-5.
view full answer...
The TrailMax Pro fits all Jeep CJ-5, CJ-7 and Wrangler models from 1976-2006, though 1997-2002 models require the installation of a Bestop Seat Adapter Bracket # B51256 and models 2003-2006 require installation of a Bestop Seat Slider with Adapter # B5124801.
There are several configurations of bolt hole dimensions that can be used with this kit.
From side to side it will either measure 13-1/2 inches or 14 inches.
From front to back it will measure 11-1/2 inches, 12-1/2 inches,... view full answer...
The passenger seat that is compatible with the Bestop TrailMax II Pro Driver Seat that you referenced is the Bestop TrailMax II Pro Passenger Seat, # B3946015. These seats are also available in a vinyl material as part # B3945015, for the passenger seat and # B3945115 for the driver seat.
If you no longer have the seat riser or slider, then you will also want to pick up a replacement seat riser, # B51254, and the seat slider, # B51255.
For the rear bench seat, you will want to look... view full answer...
The Bestop TrailMax II Fold & Tumble # B3944009 does include mounting hardware; if you take a look at the accompanying photo you can see what is included.
You are going to need to use some of your 1987 Jeep YJ's original bolts to secure the floor mounting brackets as specified in the linked instructions. view full answer...
The Bestop TrailMax II Fold & Tumble Fabric Rear Bench Seat # B3944137 uses fabric for the center panels and vinyl for the sides and back. For an all-vinyl version in spice we offer part # B3944037. view full answer...
Seat belts bolt to the vehicle and not to the seats so the Bestop TrailMax II Fixed # B3943715 would fit your 1982 Jeep CJ-7 but since you would have to run the belts to the floor of your Jeep a version isn't available that has seat belts. view full answer...
I spoke to my contact at Bestop and she told me that there is probably a way to get the Bestop Trailmax II part # B3943537 in your 1991 Jeep Wrangler, but since it was not designed for that vehicle she strongly recommended you go with the one recommended for your vehicle, part # B3944137.
It looks like the mounting hardware is the same between the two seats and the one you want is about 9 inches wider. If you REALLY wanted the newer seat in your Jeep you should at least determine if... view full answer...
For your 1983 Jeep CJ-7, the Bestop TrailMax II Sport - Fabric Front Seat - Black Denim, # B3943815, comes with just the seat. This seat is designed to fit with your factory seat riser and adjuster. You just remove 4 factory nuts, install the seat to the tracks with the included hardware, torque the bolts, then install the seat with the 4 factory nuts you removed. The Instructions will walk you through step by step.
If you want to replace your factory seat slider, you will need... view full answer...
I spoke with Bestop, the manufacturer of the seat # B3942901 you were looking at and was able to get the dimensions you needed to see if it would fit with your Snow Cat.
The seat's width is 18-3/4 inches, length 19-1/4 inches, and the back height 18-3/4 inches.
I've linked the seat to this page for your convenience. view full answer...
The Bestop TrailMax II Fold & Tumble Rear Bench part # B3943537 is designed to install in Jeep Wranglers from 1997-2006. But, the overall width of the bench is 41 inches.
So it would technically fit in the rear of your Toyota Landcruiser but the mounting brackets wouldn't match up. If you would be willing to come up with a way to secure the bench to your vehicle this would be possible. view full answer...
The Bestop TrailMax II Fold & Tumble rear seat # B3943501 does not include the mounting hardware but does include the mounting brackets. I checked the instructions and it says you are supposed to reuse the hardware from the old seat. If that hardware is not present then you will need to source it locally. I recommend grade 5 hardware.
Bestop does not specify the size and thread style/pitch so it will require some trial and error to find a match. view full answer...
There are no specific rear seats that match the Trail Max II Pro Charcoal Front Seat # B3946109 you were looking at, just driver and passenger.
A rear seat that is closest in looks to the Charcoal Fabric Front Driver Seat # B3946109 is the Bestop fabric rear bench # B3944109.
I have linked all the rear seats for your 1990 Jeep Wrangler for your convenience. view full answer...
Bestop is the original equipment manufacturer (OEM) for Jeep; they produce the stock Jeep tops as well as the seats and other trim components. They also produce upgraded aftermarket products for Jeeps. The Bestop part you referenced, # B3946109, is naturally intended for these vehicles and it fits a range of model years of the CJ-7, TJ, YJ and Wrangler.
Since it is not intended for use in your 2004 Dodge Ram 1500 SLT I cannot recommend it for that application. It would definitely require... view full answer...
I called Bestop, and from the top of the seat, where your rear would be, to the top of the headrests when fully extended is 26 inches. view full answer...
I have included a link to all of the seats that are available for your 1980 Jeep CJ-7.
One of my favorites is the Bestop TrailMax II Pro Fabric Seats.
For the Driver's Seat, part # B3946115, Passenger Seat, # B3946015, and Rear Bench Seat, # B3944115. These seats are made with mildew and UV-resistant fabric and they look great.
I spoke with my contact at Bestop and they do not have a 60/40 split bench seat available for your Jeep. view full answer...
I went out to the warehouse and measured seat # B3944137 which fits a CJ models from 1955 to 1995. These dimensions will be the same or nearly identical for all Jeep seat options.
The seat portion of the seat is approximatel7 17 inches from the front to the back rest, 5-1/2 inches thick, and 33-1/2 inches across.
The back rest is 17 inches high, not counting head rests if equipped. The headrests are adjustable up and down and are 5-3/4 inches tall themselves. The back rest is also... view full answer...
Yes, for the passenger seat that would go along with the Bestop TrailMax II Fabric Front Driver Seat # B3946115 you would want a Bestop TrailMax II Pro Fabric Front Passenger Seat # B3946015. view full answer...
The Bestop TrailMax II Fixed High Back seats are available in Spice, Charcoal, Black and Black Denim.
You can see all of the available seats by clicking on the provided link.
The seats are designed to be installed on the OE seat riser. view full answer...
Go To Results