Looking For New Axle, Hubs And Leaf Springs For A Northeast Brand Trailer

Updated 01/27/2026 | Published 08/19/2024

Question:

I have a Northeast brand trailer and I would like to replace the axle, leaf springs and hubs. I took measurements using your videos as guidance but I need some help putting a package together. I can send measurements and some photos if there is a contact to reach . Thank You

asked by: Nate P

Expert Reply:

Hey Nate, I can definitely help and point you in the right direction.

For the axle, I will need to know the weight capacity, hub face (HF) length and spring center (SC) length. There should be a tag or sticker on the axle that has this info, unless it is a really old axle in which case you will have to measure.

For the hubs, knowing what axle you are going with will determine the correct hubs. I just need to know your hub bolt pattern so we can be sure the hubs will work with your wheels.

For the leaf springs, you will need to measure. Jack up one side of the trailer so you can measure the spring when not under a load. Leaf springs are measured from center-eye to center-eye. It is very important that the new springs are identical in size to the old ones.

Drop all this info in the comments below when you have it and I am happy to help guide you to the right parts.

expert reply by: Jesse M

Jesse M.

1/27/2026

Hey Nate, were you able to gather the axle, hub, and leaf spring measurements for your Northeast trailer? Once you have those details, I can help match everything up for a complete setup. Let me know what you find so we can get you the right parts.