Could Blue Ox Leveling Kit # BLU47UR Be Used on All 4 Wheels of Trailer  

A lot of RVers still use wheel chocks like Andersen Camper Wheel Chock and Leveler part #AM3604 for extra stability. The chocks will insure the tires do not move back and forth at all. They are especially helpful if you are on very unlevel ground…

I looked up the owners manual for your 2020 Jeep Grand Cherokee. According to the manual the only model that can be flat towed (recreational towing) is the 4 wheel drive model with 4-LO range. As long as that is the model that you have then you will…

The DeeZee Red Label 5th Wheel Toolbox, part #DZ8560WB can be installed to the truck bed or it can just sit on the truck bed with no mounting required. The tool box can go behind the truck cab or at the back end of your truck to accommodate your…

The K-Source Snap & Zap Custom Towing Mirrors #KS80930 I feel are the best mirrors extensions for your 2024 GMC Sierra 1500. These have all the cut outs for turn signals, puddle lights and cameras you may have on your mirrors. The snap on design…

The CIPA Custom Towing Mirrors #CM10950 fit older model GM pickups so for your 2023 Chevy Silverado LTZ I recommend picking up the K-Source Snap & Zap Custom Towing Mirrors #KS80930 instead because they have a cutout for the turn signal as well…

Hello Brian; the 3/8" difference isn't enough to matter so you can use the #e89FV as a replacement. We do have the U-Bolt Kit for Mounting 5,200-lb to 7,000-lb Round Trailer Axles #APUBR-8 for 3" diameter axles. This has 7" long…

Hello Mark, thanks for reaching out. The TRED GT Camper Leveler Blocks #RR84AP are rated for 5,000 KG which is about 11,000 lbs. So these will be a great upgrade from wood blocks, so long as they are appropriately rated for your RV. When using…

Thanks for all of the info, Scott! I highly recommend going with the 12K Reese Dual Cam II Weight Distribution System w/Active Sway Control #RP75FR over the 10K Reese Steadi-Flex Weight Distribution System w/ Sway Control #RP66559. Even though it…

Hey Martin, it looks like the Curt Spectrum #C51170 is a universal part so it actually does not have a custom wiring harness. This brake controller is compatible with up to 4 axles, is assembled in the USA, and is compatible with ABS brakes, cruise…

The AllTrek 4000 kits provide the best cushioning so if you were to upgrade from your CRE3000 kit to the Alltrek you would see a big improvement. If you have a 35 inch wheelbase you'd want the part #MR29DR or if you have a 33 inch wheelbase…