Does Solera Awning Light Strip Kit Need to be Sealed When Trimmed

Question

Question:

I want to buy Lc423331 leds strip and trim it to 19 foots I was wondering how to seal the trimmed edge Is the track and the leds strip are both include with parts Lc674283 Is ask that question beacause it is only 10$ more Picture in attached files

asked by: Jean-Marc A

0

Expert Reply:

Hey Jean-Marc, so the part # LC423331 was designed to be trimmed and has edges that were designed to be trimmed at so you don't have to reseal anything.

Yes the LED Light Kit w/ Switch for Solera RV Awnings with Prepflex Fabric # LC674283 does come with it's own track but it was designed to install into the fabric slot of a Solera awning roller so it's not a universal application.

expert reply by: Jameson C

0

Answer 1

Hey Kevin. Our Replacement Fabric for etrailer Powered RV Awning item #e86QV is just the replacement fabric. It'll attach to your existing awning roller so long as you have a 20' powered awning. There is no stitching built into the fabric for…

view full answer...

Answer 2

Hey Leo, yes the etrailer replacement awning fabric part #e86QV does have ability to have a light strip integrated into it. Do you have an etrailer awning currently?

view full answer...

Answer 3

I spoke to Lippert and they told me that the LED Fabric Light Kit #LC674283 has a waterproof rating of IP55 but they don't have a Lumens rating for it. The best they could offer was the CCT which is 6000K. I attached a picture that shows how well…

view full answer...

Answer 4

Hey Tobi, unfortunately it does not look like the Replacement Support Arms for Solera 12V XL Power RV Awnings #LC362243 is going to work with your exisiting speaker head setup. If you used these arms, you'd effectively lose the speaker…

view full answer...

Answer 5

I reached out to Lippert and found out what you have cross references to the Solera Electric RV Awning Conversion Kit part #LC351396. This can then be paired with a fabric/roll tube of your choosing such as the 20' Wide Roller w/ Fabric for…

view full answer...

Answer 6

We do have what you need, but the Vista Light LED Kit for Solera RV Awning #LC25VR is designed to add lighting to your Solera awning. Since you already have lighting on your awning you would want the Replacement LED Light Strip for Solera RV Awning…

view full answer...

Answer 7

Thanks for the picture! The Optronics Flexible LED Light Strip item #UCL90CB is extremely versatile. It will connect to any 12-volt power source so I am sure whatever power source and switch your lights are currently running off of will work with…

view full answer...

Answer 8

Hey Jean-Marc, thanks for the pictures! The replacement LED Light Strip for Solera RV Awnings #LC423331 does fit the awning light strip channel you have.

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 12

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Does Solera Awning Light Strip Kit Need to be Sealed When Trimmed

Products Featured in This Question

Continue Researching