Thule Hullavator Pro TH898 - What Are The 35mm and 37mm Bolts For?
Updated 01/31/2024 | Published 01/30/2024 >
Products Featured in This Question
Question:
Hi, I was putting my Hullavator Pro together yesterday. I ended up with 4 bolts left over 4 * 37mm. I had 4*37mm and 4*35mm, yet only needed the 35mm as per the instructions. What are the 37mm for? I am mounting it on Wingbar 127 Evo Crossbars. Thanks Paul
asked by: Paul D
Expert Reply:
Hello Paul thanks for your question. When installing the Thule Hullavator Pro # TH898 it is completely normal to have 4 leftover bolts. The length of the bolt you use is determined by what kind of crossbar you are using. The 35mm bolts are intended for the Thule AeroBlade and Thule Probars. The 37mm bolts are actually intended for the Thule Wingbar Evo (see image below).
Since you are using the Thule Wingbars I do recommend removing the 35mm bolts and instead using the 37mm. It may fit together fine as is, but it is always recommended to do things "by the book" to avoid any potential issues down the road.
Product Page this Question was Asked From
Thule Hullavator Pro Kayak Roof Rack and Lift Assist w/ Tie-Downs - Saddle Style - Universal Mount
- Watersport Carriers
- Kayak
- Roof Mount Carrier
- Saddle-Style
- Folding
- Aero Bars
- Round Bars
- Square Bars
- Side Loading
- Clamp-On
- Track Mount
- Load Assist
- Thule
more information >
Featured Help Information
Instructions
Continue Researching
- Search Results: thule replacement end caps
- Q&A: Replacement Track Nut and Bolt for Mounting Thule Hullavator
- Q&A: Does the Thule Hullavator Have to Be Installed Using the T-Slots in Thule Wingbar Evo Crossbars
- Shop: Replacement M6 x 37 mm Screw for Thule Hullavator Pro Kayak Carrier - Qty 4
- Shop: Replacement Square Nut for DeWalt Contractor Series Ladder Racks or Thule Roof Mounted Bike Carriers
- Shop: Replacement T-Track Bracket for Thule Hullavator Pro Kayak Carrier - Qty 1
- Shop: Replacement Crossbar Mount Cover for Thule Hullavator Pro Kayak Carrier - Qty 1
- Shop: Replacement Pivot Pin for Thule Hullavator and Hullavator Pro
- Shop: Replacement Underbar Bracket for Thule Hullavator
- Shop: Replacement Bar Mount Assembly for Thule Hullavator Pro Kayak Carrier and Lift Assist - Qty 1
- Search Results: hullavator replacement parts
- Q&A: Replacement Square Nut for Thule Hullavator to Fit Crossbar Top Channel
- Search Results: thule track nut
- Search Results: static/images/styles/checksvg
- Video: Hands-On with the Replacement M6 x 37 mm Screw for Thule Hullavator Pro Kayak Carrier
- Video: Review of Thule Replacement Square Nut - 853-7557
- Video: All You Need to Know About the Malone SeaWing Kayak Roof Rack w/ Load Assist and Tie-Downs
- Video: A Closer Look at the Thule Hullavator Pro Kayak Carrier Replacement M6 x 37 mm Screw
- Q&A: Dimensions of Replacement Square Nut # 853-7557
- Q&A: T-Slot Parts for Mounting Thule Hullavator Pro on Thule WingBar Evo Crossbars
- Q&A: Replacement Parts Needed to Install Older Thule Hullavator 897XT In Crossbar T-Slots
- Q&A: What is Replacement Square Nut for DeWalt Contractor Series Ladder Racks Made of
- Video: Replacing the Thule Hullavator Kayak Carriers T-Track Bracket
- Video: The Low-Down on the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Video: Furrion Chill Cube RV Air Conditioner Review and Installation - Travel Trailer Edition
- Search Results: trailer wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)


