Should Sewer Gaskets Be Placed Inside Pipes or Camco Wastewater Replacement Valve for Installation
Updated 01/29/2024 | Published 01/27/2024
Question:
Hi What can you place on the gaskets to help keep them in place? Thanks Is it easier to place the gasket on the pipe then slide in the gate or keep it on the gate and try to slide it in? The gaskets seem to move.
asked by: Peg M
Expert Reply:
It's going to be easier to place the gaskets on the pipe and slide the Camco RV Wastewater Tank Replacement Valve # CAM39513 in between.
If you can't get the gaskets to stay in place the what I recommend doing is taking a small piece of tape to keep them in place until you can get the Camco valve started. Once the valve is started you should be able to remove your tape and slide the valve the rest of the way before installing the bolts and nuts.
Product Page this Question was Asked From
Camco RV Wastewater Tank Replacement Valve
- RV Waste Valves
- Straight Valve
- Single Waste Valve
- 3 Inch Valve Body
- Manual
- 3 Inch Spigot
- Stationary Valve
- Camco
more information >
Continue Researching
- Q&A: In What Year Did Valterra go From Old Style to New Style Waste Valves
- Q&A: Recommended Replacement Converter for a Elixir ELX-45
- Q&A: Replacement Hub for AxleTek Hub # BD2-545-17
- Q&A: Replacement for Whirlpool Microwave/Convection YWMH76719CS-0
- Q&A: Replacement For Lippert 175226/12656 4-Point Leveling Control Brain
- Q&A: Replacement Roof Vent Lid for Dexter Roof Vent Serial Number VE0108
- Q&A: Size Bolts Used to Install Friction Sway Control Unit on a Trailer