Recommended Base Plate for a 2002 Jeep Liberty  

Question:

Expert Reply:

No, they're about the same. The most difficult part of installing these baseplates is having to remove all of the trim and essentially the entire front end of your Liberty. I have linked both installation instructions below. We've only got an install video for the Roadmaster and it has been linked as well.

I recommend using the Roadmaster Direct-Connect Base Plate Kit item # RM-521423-5 for your 2002 Jeep Liberty. You already have the Roadmaster Falcon All-Terrain Tow Bar item # RM-522 so you wouldn't need an adapter. If you went with the etrailer item # e98970 you would need to purchase the Adapter Kit item # e98981 to connect to your tow bar.

Additionally, the direct connect arms on item # RM-521423-5 are completely removeable when you are not flat towing so the front end of your Jeep would look as close to factory as possible.

Here are some other parts you will need to flat tow your 2002 Jeep Liberty:

Supplemental Braking System - Brake Buddy Select 3 Portable Supplemental Braking System item # HM39524

Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267 or incase you already have the cable you will just need the following parts to connect to your Jeep's lights and control them:

Roadmaster Universal Hy-Power Diode Wiring Kit item # RM-152

RoadMaster 6-Wire Trailer Connector - item # RM-910030-7

Roadmaster Bent Electrical Socket Bracket item # RM-910030-5

expert reply by: Jerred H

0