With A TruXedo Pro X15 Tonneau Cover Interfere With A Powered Lift Tailgate

Question

Question:

Is the TruXedo Pro X15 Soft Tonneau Cover - Roll Up - Polyester and Vinyl - Matte Black Item # TX1473301 compatible with the power down/up tail gate of the 2024 Chevrolet Silverado 2500HD? In other words, does the tonneau cover, when fully closed and locked in place, interfere with free operation of the tail gate?

asked by: Phil B

0

Expert Reply:

I confirmed with TruXedo that the TruXedo Pro X15 Soft Tonneau Cover # TX1473301 would not interfere with the powered tailgate on your 2024 Chevy Silverado 2500. If the tailgate was closed you would have to open it to close the cover though.

expert reply by: Kevin C

0

Answer 1

Hey Lester, thanks for the pics and the measurements. The only roll up cover that's possibly going to work with your set up is the TruXedo TruXport Soft item #TX246901. The reason this will work on your Ram 3500 is that the rails mount on top of…

view full answer...

Answer 2

It looks like you are referring to the Pace Edwards Switchblade Retractable Hard Tonneau Cover - Aluminum and Vinyl - Black #311-SWFA19A45 and the Pace Edwards JackRabbit Retractable Hard Tonneau Cover - Aluminum and Vinyl - Matte Black…

view full answer...

Answer 3

Pace Edwards has two confirmed fitting Switchblade covers for your 2024 Chevy Silverado 3500 DRW 8' bed; part #PE87CV, which is an aluminum and vinyl mix and part #PE77CV, which is just aluminum.

view full answer...

Answer 4

When you replace leaf springs on a trailer you want to match the capacity as well as the length. Since your 2021 Wolfpack 365PACK16 has 7k axles you want 7k leaf springs (3,500 lbs per spring). You can also use your spring eye to spring eye…

view full answer...

Answer 5

Hello Mike, Sorry to hear that you installed the Progressive Dynamics Replacement Section for AC/DC Power Distribution Panel - 45 Amp #PD4645V and your AGM batteries is not getting a full charge. Good news is, this model is made to work with AGM…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The shipping weight of the B&W Companion OEM 5th Wheel Hitch #BWRVK3305 is 152 lbs so it will be just under that after you remove the packaging. Although it is still pretty hefty, the head unit part #BWRVC3006 can easily be removed off of the…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Hey Jonathon, typically whenever your leaf spring brackets / components are breaking it's usually caused by worn out components, improper alignment of your axles, or previous damage to the suspension system. Most commonly it's because of worn…

view full answer...

Answer 10

Hey Jason, so we know that your 2020 Grand Design Solitude 390RK does have 8k axles so in terms of capacity the leaf spring part #e89FV that you referenced would work but we don't have a way to verify the length of your current springs so you…

view full answer...

With A TruXedo Pro X15 Tonneau Cover Interfere With A Powered Lift Tailgate

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching