Can The Trailer Valet RVR3 Remote-Controlled Trailer Dolly # TVRVR3 Be Used In Pea Gravel?

Question

Question:

Will the TVRVR3 operate on a pea gravel surface that has a slight decline?

asked by: Jeff M

0

Expert Reply:

The Trailer Valet RVR3 Remote-Controlled Trailer Dolly # TVRVR3 is capable of operating on an incline up to 5 degrees. As far as using it on pea gravel it will work without issues if the pea gravel is not loose. If your pea gravel is very loose it will end up sinking and getting buried in the gravel.

expert reply by: Bud M

0

Answer 1

I took a look at the manual for the Trailer Valet RVR3 Remote-Controlled Trailer Dolly part #TVRVR3 and the following is what they recommend for storage. "Put the RVR in the transport box/bag delivered from the factory. If the storage box/bag…

view full answer...

Answer 2

I checked with Trailer Valet and the height range of the frame bracket of the Trailer Valet RVR3 part #TVRVR3 is between 13.5 inches and 20 inches.

view full answer...

Answer 3

My contact at Erickson confirmed that you are definitely able to use the Vertical E-Track #E19146 in the horizontal position. The advantage for you is that it will mount to the space you need it to fit. The only disadvantage of using the Vertical…

view full answer...

Answer 4

You might consider using the Race Ramps Trak-Jax Ramp Set #RR-TJ-S to provide a height transition between your higher garage floor and your driveway. These ramps are a bit over 3-inches tall at the top of the ramp (4-1/2-inch tall overall at the tire…

view full answer...

Answer 5

Hey Brian. The Trailer Valet RVR3 item #TVRVR3-BB225, you were looking at, is actually smaller than your Trailer Valet RVR5 item #TVRVR5. It's going to do even worse job on gravel plus it's way under-capacity for your 2023 Airstream Flying…

view full answer...

Answer 6

Hey Terry, you’re likely not doing anything wrong. The Force #PA96VR has wide 6-1/2” tires that give great traction, but they don’t pivot sharply. For tight angle turns, it helps to alternate between forward and reverse, “walking” the tongue in…

view full answer...

Answer 7

It sure will Russel. The Parkit360 Force Electric Trailer Dolly item #PA96VR has a 5,000 lbs capacity. It's going to work great with your Jayco Jay Flight SLX 195RB. It also has both a 2" and 2-5/16" hitch ball included. What kind of…

view full answer...

Answer 8

Hi Chris! The Parkit360 Force Electric Trailer Dolly - 10,000 lbs #PA46VR has a 2 prong plug (see attached image). I will admit to be surprised by that, but that is what they decided to go with. It isn't going to hurt anything though. What are…

view full answer...

Answer 9

Hey Bill, what you want is a single piece stainless steel lug nut like the part #KALN1375S. These won't corrode, swell up, or come apart like the chrome plated ones that you tried so you'll be really happy with them. These are for 1/2 inch…

view full answer...

Answer 10

Hey Tom! Great question. The Parkit360 Force Electric Trailer Dolly #PA96VR (5,000 lbs) and #PA46VR (10,000 lbs) will work on an incline. However, if the grade is more than 6% you cannot use the dolly. As long as your driveway is no more than a 6%…

view full answer...

Answer 11

Since there isn't an adapter for the Lock N Roll articulating couplers you wouldn't be able to use the part #TVRVR9 but you could use the Trailer Valet RVR3 part #TVRVR3 instead which instead attaches to the frame of the trailer. This…

view full answer...