Recommended Replacement Hand Winch and Strap for a Fulton T600 Winch

Updated 07/03/2023 | Published 06/30/2023

Products Featured in This Question

BoatBuckle PWC Winch Strap with Hook and Soft Tie - Loop End - 2" x 15' - 3,500 lbs

(89)

$25.09

Hand Winch Strap with Safety Hook, 2" Wide x 15' Long - 4,000 lbs.

(57)

$22.50

Question:

Hello, I have two Fulton T600 hand winches on my trailer and they have 2 x 15 straps...I need replacements and found some on your website, can you confirm that these straps hooks will fill the receiving hook on a 2001 SeaDoo DTX DI? Some of the replacement straps on the market have large hooks for boats that will not fit on a PWC. BoatBuckle PWC Winch Strap with Hook and Soft Tie - Loop End - 2 x 15 - 3,500 lbs Item # IMF14216 If these are not correct can you recommedn the correct straps? Thanks

asked by: John

Expert Reply:

It appears that the Fulton T600 has been discontinued and no longer offers replacement straps for that winch. I am going to have no way of knowing if the BoatBuckle PWC Winch Strap with Hook and Soft Tie # IMF14216 you're looking at will work with your current winch or if it will work with your SeaDoo.

That being said, the best thing I can recommend is to replace the entire winch with it's beefier upgrade the Fulton Single Speed Trailer Winch # F142002 with the strap # DL24239. This winch has a 900- lb capacity which is 300 lbs higher than the 600 lb capacity of your T600. Also, this winch has a 7" handle, a 3:1:1 gear ratio, and 600 hour salt spray rating for corrosion resistance.

I can also say that the hook on this strap measure .83" at the widest/thickest part so as long as your SeaDoo has enough space to receive that much then you'd be all set.

expert reply by: Bryce D