Recommended Storage Cover For An etrailer XHD Tow Bar

Question

Question:

Do you sell a cover for the etrailer XHD Non-Binding Tow Bar for Blue Ox Base Plates - RV Mount - 2inch Hitch - 10,500 lbs, Item # e67ZR? or is there one that would fit that you would recommend? thx,

asked by: Matt A

0

Expert Reply:

Yes, the correct storage cover for the etrailer XHD Non-Binding Tow Bar for Blue Ox Base Plates # e67ZR would be the Demco Tow Bar Storage Cover # DM9523042.

expert reply by: Kevin C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 3

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 4

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

Yes, you can Brian. While GM does not require you to install the Roadmaster Battery Disconnect item #RM-766 to flat tow your 2020 Chevy Equinox you can still do it. You will lose all your preset settings though for your radio and your seats. It's…

view full answer...

Answer 7

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Answer 8

Hi Ken! It looks like you have almost everything you need to set up your 2026 Jeep Gladiator Sahara for flat towing. The etrailer Invisible Base Plate Kit - Removable Arms #e98948 is a perfect fit and the etrailer XHD Non-Binding Tow Bar - RV Mount -…

view full answer...

Answer 9

Thanks for the information Kevin! To flat tow your 2025 Ford Bronco with a standard bumper and LED lights, I recommend the following parts: Tow Bar and Safety Chains - etrailer XHD Non-Binding Tow Bar for Roadmaster Direct-Connect item #e84ZR Base…

view full answer...

Answer 10

Thanks for your question, James. Both the etrailer #e98948 and Demco #DM9519336 base plates will have a very similar, low-profile look once they’re installed, so neither one really stands out more than the other. They’re both custom-fit for your…

view full answer...

Answer 11

Hey, Skip! Happy to help get your new Jeep set up for flat towing. There is going to be a list of parts, so I'll go ahead and list them all below for ya. Blue Ox Base Plate: Part #BX1139 Blue Ox Avail Non-Binding Tow Bar: Part #BX7420 Demco…

view full answer...

Answer 12

I attached a picture to this page that I hope is helpful. I took it from the install instructions for the Blue Ox base plate kit #BX1730 and it shows where all of the fasteners are that need to be removed in order to remove the front fascia. Once…

view full answer...

Recommended Storage Cover For An etrailer XHD Tow Bar

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching