Recommended Trailer Hitch Receiver For A 2007 Mitsubishi Endeavor
Updated 06/10/2023 | Published 06/09/2023
Products Featured in This Question
Question:
Do you have a trailer hitch for my misabishi endeavor 07 if so which one
asked by: Keith C
Expert Reply:
Yes, we currently have one trailer hitch confirmed to fit your 2007 Mitsubishi Endeavor, the Curt Trailer Hitch Receiver # 13113. This trailer hitch has a 2" receiver tube opening, which is the most common for towing and other hitch accessories (bike racks, cargo carriers, etc.). It has a 3,500lb gross trailer weight (GTW) capacity and 350lb tongue weight (TW) capacity. You'll want to refer to your owner's manual to ensure that the vehicle matches the capacities of the hitch, if not you'll go with whichever is lower.
If you plan on towing anything that require lights then you'll also want to pick up the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56039 so that your Endeavor will have a 4-pole connector for the accessory or trailer to plug into.
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- For Towing
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Tekonsha Brake Controller Wiring Adapter For A 2025 Ram 1500
- Q&A: Inner and Outer Diameter of the Chrome Edge Trim SAT012ET
- Q&A: Where Does the 4-Flat Connector from Wiring Harness # C56039 go on a 2010 Mitsubishi Endeavor
- Q&A: Trailer Wiring Harness for 2004 Mitsubishi Endeavor
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Difference Between Underslung and Overslung Coupler For Weight Distribution System
- Q&A: Does the Tekonsha P3 Trailer Brake Controller Turn Off or Stay On All the Time