Hub Bore Diameter Of 8" x 3-3/4" 5 on 4-1/2" Wheel AM20006
Updated 03/27/2023 | Published 03/25/2023
Products Featured in This Question
Question:
Hey I’m looking for two trailer rims. They are 8 inch 5x4.5 lug. I measured the width of the rim and it’s 4 inches from bead to bead. The part that screws me up is the center hole is 3.25 inches in diameter. I’m having trouble finding a rim with a large enough center hole. I’m going to measure the hub on the trailer on Monday to double check but they are fairly large. Thanks-Dustin
asked by: Dustin
Expert Reply:
The only 8" wheels with 5 on 4-1/2" bolt pattern close to 4" wide are the following:
White # AM20006
Galvanized # AM20008
Both of these are 3-3/4" wide, which is measured inside to inside of the bead seat so this is likely what your wheel is. However these are only available with a 2.81 hub bore diameter. As long as your hub bore is smaller than this it'll work fine, but if you need larger you'll have to look elsewhere for the wheels.
Product Page this Question was Asked From
Steel Trailer Wheel - 8" x 3-3/4" Rim - 5 on 4-1/2 - White
- Trailer Tires and Wheels
- Wheel Only
- 8 Inch
- 5 on 4-1/2 Inch
- Steel Wheels - Powder Coat
- Americana
more information >
Continue Researching
- Q&A: Can I Upgrade to a Load Range D Tire Size 165/65-8
- Q&A: How Much Offset Does the Kenda 215/60-8 Bias Trailer Tire Have?
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Availability of Trailer Wheel and Tire in Size 165/65-8 with Zero Offset
- Q&A: What is Minimum Clearance Between Trailer Tire Sidewall and Trailer Frame
- Q&A: How to Measure for Offset on Trailer Wheel
- Q&A: 2,000 lb Axle Leaf Spring Recommendation for Trailer that has 26-1/4 inch Long Springs
- Article: Most Popular Wheel Bearings