Curt Trailer Hitch # C15445 Recommendation for a 2014 Ford F350 Cab and Chassis with Flat Bed

Question

Question:

I am looking for a heavy duty 2 inch reciever hitch for my 2014 F350 cab and chassis with a rear fuel tank. it also has a Mortiz alluminum flatbed. I am wondering which hitch will work on my truck. Thank You,

asked by: Ben Y

1

Helpful Expert Reply:

The CURT Trailer Hitch Receiver # C15445 that you referenced should work well for your 2014 Ford F350 Cab and Chassis as this hitch is confirmed to fit all model 2014 Cab and Chassis F350s. As long as your fuel tank is in the factory location you should be fine.

expert reply by: Jameson C

1

Answer 1

Hello Joe. To install the CURT Trailer Hitch, #C15445, on a 2011 Ford F-350 Cab and Chassis only model, you will need to drill two holes in the frame using a 9/16 inch drill bit. These holes are for the forward most attachment points on the vehicle.…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 5

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 6

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 7

I have a hitch that will work great for your Forest River Georgetown but the Curt item #C14082 will not fit. It's designed for a bunch of Ford and GM trucks built from 1963-1997. For your motorhome on a 2021 Ford F53 chassis, I recommend the Curt…

view full answer...

Answer 8

I just went out to the warehouse and measured the Curt Trailer Hitch Receiver item #C15845. I have attached a couple of diagrams with the dimensions of this hitch on them. From the center of the back bolt to the front of the receiver is 26" The…

view full answer...

Answer 9

Jim, you can use the Adjustable Width Trailer Hitch Receiver for RVs #C13702. This hitch is adjustable so it will work with frames that have an 18" to 53" wide frame, a 5,000 GTW capacity, and 500 lb tongue weight capacity. This hitch can…

view full answer...

Answer 10

The Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2" #C15845 will come down about 8 inches from the frame. It does add some support to help with an underrun in a rear end collision so as long as the drop is enough but…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Hey Hunter congrats on the new vehicle! To tow a small trailer with your 2025 Mazda CX-90 you're going to need a hitch, a wiring harness, a couple of mounting brackets, and a ball mount kit. The best hitch for your CX-90 is going to be the Curt…

view full answer...

Curt Trailer Hitch # C15445 Recommendation for a 2014 Ford F350 Cab and Chassis with Flat Bed

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching