Can Extang Tonneau Cover for 2013 Ram 2500 with Rambox Fit with DeeZee Chest Toolbox Installed

Updated 12/16/2013 | Published 12/14/2013

Products Featured in This Question

DeeZee Red Label Truck Bed Tool Box - Utility Chest Style - Aluminum - 9.5 Cu Ft - Silver

(22)

$556.30

DeeZee Red Label Truck Bed Tool Box - Utility Chest Style - Aluminum - 8 Cu Ft - Silver

(22)

$424.79

Question:

Mike I just purchased a 2013 Ram 2500 6ft box 76 in inside front back edge of bed I want to install the dz8556 tool box inside the bed and install the ex46426 tonneau cover over it to protect when not in use. Is it a go? Thanks for your help in advance

asked by: Terry B

Expert Reply:

Measure the inside width of the bed at the front where the box will set. The width of toolbox # DZ8556 is 56 inches. The height when you factor in the lid is just under 17 inches. Measure from the top of the bed corrugations to the top of the bed sides to determine fit.

Some parts of tonneau cover # EX83426 will hang below the tops of the bed on the underside of the cover but they should be off to the sides where the cover attaches to the bed. Given the width at 56 inches for the box this would not pose a problem if the bed width is wide enough. But on Rams that have the Rambox feature the bed is more narrow.

If the box width is tool long then I recommend going with the shorter version, # DZ8546 at 46-1/2 inches and the same 17 inches tall overall.

expert reply by: Michael H