Mounting Dimensions For Curt Trailer Hitch Receiver # C12123

Updated 10/18/2022 | Published 10/15/2022

Products Featured in This Question

Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"

(43)

$207.34

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(93)

$65.29

Master Lock Trailer Hitch Receiver Lock and Coupler Lock Set - 1-1/4" and 2" Hitches

(85)

$60.76

Curt Class II Euro Style Drawbar with 1-7/8" Ball - 4-5/8" Rise - 3,500 lbs

(386)

$38.34

Curt Class II Euro Style Drawbar with 2" Ball - 2-5/8" Rise - 3,500 lbs

(386)

$35.94

Curt Hitch Pin and Clip for 1-1/4" Hitches - 1/2" Diameter x 2" Span

(2932)

$2.87

Question:

I need the measurements of C12123. If you get that to me I’d appreciate it. Thank you.

asked by: Tina G

Expert Reply:

The Curt Trailer Hitch Receiver # C12123 has mounting holes that are separated 38-1/2" from drivers to passenger side on center. The lower mounting hole sits 2-3/4" below the upper mounting hole and they are separated 7-3/4" on the same horizontal line. This receiver is custom fit for the 2014-2022(current model year) Ford Transit Connect. I have included a image below with the measurements as well.

Curt does recommend using either the 1-7/8" # C45571 or 2" # C45572 Euro Drawbar with this receiver. You can use a Pin and Clip # F-4 to hold it in place. Or you can secure it and your trailer using the Master Lock Trailer Hitch Receiver Lock and Coupler Lock Set # 3794DAT.

The T-One Vehicle Wiring Harness # 118613 will give you a 4-way flat connector that will allow you to tow most small trailers.