Brake Controller Installation on 2010 Nissan Titan

Updated 10/14/2013 | Published 10/10/2013

Question:

How do I tell if my Nissan Titan 2010 has factory wiring for this controller? it has a 7 way plug on back. does that mean I can order with the adapter shown and it just plugs in

asked by: Andy

Expert Reply:

All 2010 Nissan Titans came equipped with the connector under the dash, which is located between the steering column and the emergency brake pedal. I have provided a photo showing where the plug is located.

The Tekonsha Prodigy P2 you mentioned is a very good brake controller that would be a great choice. You would also need the Nissan Brake Controller Wiring Adapter, part # 3050-P. The controller would mount to the underside of the dash within easy reach of the driver, usually to the right of the steering column. One end of the 3050-P would plug into the back of the brake controller, the other end would plug into the connector under the dash.

expert reply by: Mike L