Parts Needed to Install a Secondary Propane Line Into Camper For Auxiliary Heater

Updated 04/06/2022 | Published 04/05/2022

Products Featured in This Question

MB Sturgis Quick-Disconnect Kit for Low Pressure Appliances

(62)

$37.74

MB Sturgis Propane Adapter Hose - Model 250 Quick-Disconnect x 3/8" Female Flare - 5'

(1025)

$29.22

Propane Quick-Disconnect Hose w/ Regulator - Type 1 - 6'

(12)

$75.39

Question:

Do you have or can you make an easy to install all inclusive propane hook-up KIT from an outside tank to an inside portable/ventless heater. I want to install an outside to inside bulkhead system as a back-up heat source that doesnt use as much propane as the furnace. I would also want quick-connect functionality. Is there someone that makes such a easy install kit?

asked by: Michael D

Expert Reply:

For adding a second inclusive propane hook up I recommend the following parts. First a Propane Quick-Disconnect Hose w/ Regulator # 37207-31275 will connect to the propane tank with a type 1 fitting(outer threads). It has a female quick connect to allow you to easily remove it when not needed.

Next the MB Sturgis Quick Disconnect Kit # 104052-401132 can be used to hardline into your living space. Using a solid black steel line is preferred over rubber hoses when going into the living space as it will not chafe as parts move. The male portion will connect on the outside of the camper while the female connector can be placed inside where you plan to place your heater. This will ensure any leftover fumes in the lines vent outside the camper and not inside.

Finally, a hose like the MB Sturgis RV Quick-Connect Propane Hose # 100304-60-MBS can be used to attach the heater. This particular hose is 5' long and has a 3/8" female flare swivel connection for connecting to the heater. If your heater requires a different connection please let me know its requirements and a length of hose you require.

expert reply by: Bud M