Replacement for 95 Inch Long 7,000 Pound Dexter Axle

Updated 03/03/2022 | Published 03/02/2022

Products Featured in This Question

Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 95" Long - 7,000 lbs

(804)

$602.55

Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter

(650)

$11.95

Question:

Im looking for a dexter axle. The number on the tag is 534468. It is a 4 inch , 7000lbs, 95 hub face and 78 spring center. Thanks

asked by: Greg O

Expert Reply:

For a replacement axle I recommend the Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 95" Long - 7,000 lbs # 8327860. I'm assuming by "4 inch" you meant a 4" drop since 7k axles have a diameter of 3". This axle will be the same as your current axle with the exception of the spring-center-to-spring-center length which is 79-1/4".

The spring center measurement not matching up is fairly common but there is a solution. You will need to have the spring seats cut off of the axle and then the Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter # TRSS300 can be welded on to match your current 78" measurement.

I have attached some review and installation videos for your reference.

expert reply by: Robin H