Can The Thule Tepui Foothill Rooftop Tent Be Mounted To The Roof Of A 2019 Toyota Tacoma?

Question

Question:

I have a 2019 tacoma double cab short bed with Thule rack I want to get the Thule foothill to mount on roof of my truck would I have enough space/weight

asked by: Michael S

0

Expert Reply:

Yes you can use the Thule Tepui Foothill Rooftop Tent # TH37HJ, with a roof rack like the Thule WingBar Evo # TH711400, with the feet # TH710401, however if you have a slick top roof, this will not be a viable option.

Instead, you're going to need to mount this to a ladder rack like the T-Rac Pro2 Ladder Rack for Toyota Tacoma # TH37005XT.

You're also going to want to check the owner's manual for the maximum weight of your roof, and ensure you're not going to overload it, if you decide to use cross bars.

This rack has a maximum carrying capacity of 1,000-lbs, which is below your vehicle's maximum payload capacity and more than enough to support the Thule Tepui # TH37HJ.

expert reply by: Bryce D

0

Answer 1

Hello Howard; the Thule Tepui Foothill Rooftop Tent #TH37HJ is only able to mount on crossbars by clamping on. Would you prefer a rooftop tent that mounts in the top channel of your crossbars? If so, I recommend the Rhino-Rack Soft Shell Rooftop Tent…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 5

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 6

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

view full answer...

Answer 7

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 8

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

view full answer...

Answer 9

We can get you everything you need for towing with your 2017 Toyota Sienna XLE. By plastic shield, I believe you are referring to the appearance panel underneath the Sienna, and that will have to trimmed a bit in each of the hitches available for the…

view full answer...

Answer 10

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 11

It sounds like you may already have a 4 way connector on your vehicle, which is half of the battle. In order to operate the Curt Echo Mobile Wireless Brake Controller #C51180 you will need an almost fully functional 7 way connector; using something…

view full answer...

Answer 12

Hello Dan, We can most definitely get you set up to use your Redarc Tow-Pro Liberty brake controller in your 2022 Toyota Highlander. Since you were looking at the #ETBC7, I’m assuming your Highlander does not have the factory tow package. To equip…

view full answer...

Can The Thule Tepui Foothill Rooftop Tent Be Mounted To The Roof Of A 2019 Toyota Tacoma?

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching