Bolt Hole Spacing for Curt Trailer Hitch Receiver 13377 for 2021 Nissan Rogue Sport
Updated 10/18/2021 | Published 10/17/2021
Question:
Hi , could you tell me the hole spacing on the Curt 13377 and is the spacing the same on both sides . If not , could you tell me the spacing on both sides . Thanks
asked by: Mark
Helpful Expert Reply:
From side to side, the bolt holes on the Curt # 13377 are all the same distance apart at 42.46 inches center to center. From the rear to the front, the distance from the first hole to the second hole is 2.804 inches. The distance from the second, or middle, hole to the hole closest to the front of the vehicle is 3.673 inches. This is the same for both sides of the hitch. I have provided a diagram showing these measurements for your reference.
(click to enlarge)
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- For Towing
- Class III
- 525 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Will Pull Out Steps fit 2011 Palomino Puma 27KFQ
- Q&A: Are Special Tools Required For Assembly And Use Of Hollywood Racks Crosstrack Bike Racks?
- Q&A: Will Trunk Mount Bike Rack Fit a 2014 Nissan Rogue SL
- Q&A: How to Install Trailer Hitch on Vehicle that is Missing Weld Nuts in Trailer Frame
- Q&A: Trailer Hitch To Carry Bike Rack and Tow Small Trailer With 2020 Nissan Rogue Sport
- Q&A: Replacement Leaf Spring Recommendation for Dexter 072-097-00
- Q&A: Replacement Hub for a Karavan Single Jet Ski Trailer w/ a 5 on 4 1/2 Lug Pattern and 13" Wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Hitch Receiver Sizes