Correct Hub Setting for Yakima FullBack on 2021 Tesla Model 3

Question

Question:

Can you help me find the hub setting?

asked by: Bob

0

Expert Reply:

Sure can! You'll want to set the hub to 3 when installing the Yakima FullBack 3 Bike Rack # Y02633 on your 2021 Tesla Model 3. You'll also want to adjust the bike rack so that the base pad is 1" above the bumper for proper fitment.

The top hooks will need to be installed in anchor mode as well. You can see how this is installed in the instructions or by looking at the attached video I shot on a 2020 Audi Q7. If you jump to the 3:24 minute mar of the video you'll see me explain how to change the hooks to the anchor mode.

expert reply by: Jon G

0

Varun

6/14/2024

Hello Jon. Can you please attached the video for the 2020 Audi Q7?

Jon G.

6/16/2024

@Varun It's just further down on this answer page, but I'm attaching it to this comment as well.

Helpful Links

tv-install-yakima-fullback-trunk-mount-2-bike-rack-2020-audi-q7-y02634.aspx

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 4

I can absolutely confirm for you that the Yakima FullBack trunk-mounted bike rack will fit your 2020 Mazda CX-30. I confirmed with Yakima that both the 2-bike and 3-bike versions are a fit for your 2020 CX-30: - Yakima FullBack 2-Bike Rack #Y02634 -…

view full answer...

Answer 5

I have a great demonstration video that shows exactly what to do! Our expert Jon walks you through how to turn the bottom hooks of the FullBack 2 #Y02634 into the "anchor mode" at the attached video at timestamp 3:25. You simply flip the…

view full answer...

Answer 6

Hey Emily, thanks for reaching out. We do have a 3-bike trunk rack we've confirmed to fit the 2024 Toyota Highlander. A lot of manufacturers have gotten way more cautious with trunk rack fit approvals on newer SUVs like the 2024 Highlander…

view full answer...

Answer 7

Hey David, your RockyMounts MonoRail 2 bike rack #RKY10004 will fit and work great in the Curt hitch part #C94WR. When this hitch is installed there will be 3-1/4 inches from the center of it's hitch pin hole out to the furthest point on the rear…

view full answer...

Answer 8

I highly recommend the etrailer Trailer Hitch Receiver #e38KR for your 2024 Hyundai Tucson PHEV because it's the only trailer hitch option for your vehicle that comes with a matte black finish. This finish not only looks more OEM than the…

view full answer...

Answer 9

Hey Robert! The Thule OutPace #TH39SA will work as long as your tires are no wider than 3". Everything else will work well with your e-bikes. The max capacity is 55 lbs per bike so you're right at capacity but that's fine. The strap…

view full answer...

Answer 10

Yes, the Demco Spare Tire Carrier part #DM15851-76 does work great with the tire size ST235/80R16 that you referenced. We had a customer with your exact tire size send us a picture of it carrying the wheel which I attached.

view full answer...

Answer 11

To add a hitch to your 2024 Hyundai Tucson, I recommend the Curt item #C94WR. This hitch is custom fit and bolts to your Hyundai with included hardware. This is a class III hitch with a 2" receiver. It has a 3,500 lbs towing capacity and a 525…

view full answer...

Answer 12

According to Dexter Axle, the attachment bolts for a 12 x 2 brake assembly should be torqued to 25-50 foot/lbs. If you don't have a torque wrench handy, if you tighten the bolts until the lock washers flatten out, you'll be pretty darn close…

view full answer...

Correct Hub Setting for Yakima FullBack on 2021 Tesla Model 3

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching