What O.D. Pipe Mount Does The Pro Series Round Pipe Mount Swivel Jack Fit On?

Updated 09/27/2021 | Published 09/26/2021

Question:

I am replacing a worn out tube-mounted jack stand on a trailer. It is mounted and under load right now but it seems to me that the tube welded to the trailer is 2 1/2inch O/D. Could you check that your specified answer to one of the questions is that your standard mount is for a welded tube of 2inch o/d, as opposed to pipe diameter, which is often the bore dimension.

asked by: John D

Expert Reply:

The Pro Series Round, Pipe-Mount Swivel Jack w/ Footplate - Sidewind - 15" Lift - 5,000 lbs # PS1401440303 you were looking at gets mounted to the included pipe mount, or an existing pipe mount that has an outside diameter of 2".

You will want to remove your current jack and verify what pipe mount diameter you have before placing an order for this jack, or worst case you can have the included pipe mount welded to the frame of your trailer if your current mount is a different size.

I included a video of the # PS1401440303 for you to take a look at.

expert reply by: Samuel C