Recommended RV Cover for 2020 Winnebago Micro Minnie Travel Trailer With Logo

Updated 09/20/2021 | Published 09/13/2021

Question:

I have a winnebago micro minnie cover 2306bhs, which measured for a cover is 23' 6" not counting the trailer tongue. Do you have a Winnebago cover that would fit? My understanding is the ADCO part number # 94842 for a cover that covers 22foot 1inch to 24. Do I need a longer cover?

asked by: ERIC A

Expert Reply:

For a customized RV cover with the Winnebago Flying W logo on it, we have in stock the Winnebago Adco RV Cover, # 290-64843 with actual dimensions of 315" long x 100" wide x 96" tall. This is listed for Winnebago travel trailers 22'1" - 24'. While this may be a little longer than needed if yours is measured at 23' and 6", not including the trailers tongue, it has cinch ropes at front and rear of cover used to remove some slack. This also has straps secured under the vehicle to prevent the cover from blowing off in the wind. The other part number you refer to has actual dimensions of 291" long x 100" wide x 90" tall. That will be too short for your trailer of 23' 6" (294").

The Camco UltraGuard Class C/Travel Trailer Cover - 22' Long Item # CAM45740 comes with straps on the side to tighten up the cover for a snug fit. This is a good fit for your 2020 Winnebago Micro Minnie Travel Trailer but does not have the logo.

expert reply by: Michael R